If one is interested in learning about railguns, coilguns or related issues then the internet does not have much to offer. The IEEE has all the good publications on this subject, and they are not free. The bi-annual Electromagnetic Launch Symposium. publishes many papers in the IEEE transactions on magnetics . These papers are available online to IEEE Magnetics Society members and cover the last several decades of electromagnetic propulsion research. Many academic libraries and university computer labs may have subscriptions to the online archives as well.
Below is a list of what I believe are all the papers published by the IEEE Magnetics Society from the Electromagnetic Launch Symposium. This list was generated automatically by a python program that I wrote to collect the metadata from my copies of these papers. Furthermore, the metadata was entered into the pdf copies of these papers by me. So, it is certain that errors are present in this list. I only list the primary author of each paper, most of these papers have several authors. Also, there is a chance that some unrelated papers made the list. In fact some of the papers presented at the Electromagnetic Launch Symposium don't always have much to do with electromagnetic launch. The point is that there is a ton of literature, and now you know where it is, if you didn't already.
| Publication Year | Document Title | Main Author |
| 1982 | A Laboratory Demonstration Electromagnetic Launcher | Daniel W. Deis |
| 1982 | Applications of Electromagnetic Accelerators to Space Propulsion | D. P. Bauer |
| 1982 | Applications of Rep-Rateable Mass Accelerators (Such as MAID) | D. A. Tidman |
| 1982 | Arc Dynamics in The Rail Gun | John D. Powell |
| 1982 | Arc-Commutated Launcher | Peter Mongeau |
| 1982 | ARRADCOM/DARPA Compact Homopolar Generator | J. H. Gully |
| 1982 | Centrifugal Projectile Launchers | F. S. Felber |
| 1982 | Concepts and Limitations of Macroparticle Accelerators Using Travelling Magnetic Waves | Stefan L. Wipf |
| 1982 | Design and Fabrication of Large- and Small-Bore Railguns | A. L. Brooks |
| 1982 | Design, Construction, and Performance of a Large-Volume Magnetic Shield | Vaino O. Kelha |
| 1982 | Electromagnetic Propulsion a New Initiative | Hary D. Fair Jr. |
| 1982 | Experimental Launcher Facility - ELF-I: Design and Operation | Daniek W. Deis |
| 1982 | Explosive Flux Compression Generators for Railgun Power Sources | C. M. Fowler |
| 1982 | Helical Rail Glider Launcher | Peter Mongeau |
| 1982 | Homopolar Current Source for Mass Accelerators | I. M. Vitkovitsky |
| 1982 | Integroddifferential Finite element Formulation of Two-Dimensional Steady-State Skin Effect Problems | A. Konrad |
| 1982 | Interactive Electromagnetic Launcher Simulation | F. J. Young |
| 1982 | Interior Ballistics of a Hybrid Electromagnetic Gun | Osman K. Mawardi |
| 1982 | Magnetic Booster Target Low Velocity High Yield Impact Fusion | F. Winterberg |
| 1982 | MAGRAC--A Railgun Simulation Program | F. J. Deadrick |
| 1982 | Mass Driver Reaction Engine Characteristics and Performance in Earth Orbital Transfer Missions | William R. Snow |
| 1982 | Mass Driver Two: A Status Report | Joel A. Kubby |
| 1982 | Possible Application of Electromagnetic Guns to Impact Fusion | R. N. Kostoff |
| 1982 | Pulsed Power for Electromagnetic Launching | M. Cowan |
| 1982 | Rail and Armature Current Distributions In Electromagnetic Launchers | Fredrick J. Young |
| 1982 | Results of Railgun Experiments Powered by Magnetic Flux Compression Generators | R. S. Hawke |
| 1982 | The Electromagnetic Theta Gun and Tubular Projectiles | T. J. Burgewss |
| 1982 | The Maid System - Data Base and Design Issues | S. A. Goldstein |
| 1982 | The Proposed CEM-UT 50-MJ Pulsed Homopolar Generator Power Supply | William F. Weldon |
| 1982 | The Rotating Bed Reactor as as Power Source for EM Gun Applications | J. Powell |
| 1982 | The TAERF Scientific Railgun Theoretical Performance | Rachard A. Marshall |
| 1982 | Three-Dimensional Field Computation | C. W. Trowbridge |
| 1982 | TRAIL: ATokamak Rail Gun Limiter for Fusion Reactors | James R. Powell |
| 1984 | A Coaxial Radial Opening Switch for a Distributed-Energy-Store Rail Launcher | J. L. Upshaw |
| 1984 | A Compulsator Driven Rapid-Fire EM Gun | S. B. Pratap |
| 1984 | A New High Current Laboratory and Pulsed Power Homopolar Generator Power Supply at the University of Texas | J. E. Floyd |
| 1984 | A Reusable Inverse Railgun Magnetic Flux Compression Generator to Suit the Earth-To-Space-Rail-Launcher | Richard A. Marshall |
| 1984 | A Systems Tester for Compact HPG Component Development | W. A. Walls |
| 1984 | Ampere Tension in Electric Conductors | Peter Graneau |
| 1984 | Analysis of Helical Bush Commutation | Peter Mongeau |
| 1984 | Analysis of Plasma Arcs in Arc-Driven Rail Guns | Jad H. Batteh |
| 1984 | Basic Principles of Coaxial Launch Technology | Henry Kolm |
| 1984 | Compact Homopolar Generator Developed at CEM-UT | J. H. Gully |
| 1984 | Current Flow Patterns in Railgun Rails | Richard A. Marshall |
| 1984 | Design and Operation of a Self Activating Crowbar Switch | G. A. Clark |
| 1984 | Design and Testing of a Magnetically Operated Rep-Rate Opening Switch | H. Sze |
| 1984 | Design and Testing of High-Pressure Railguns and Projectiles | D. R. Peterson |
| 1984 | Development of a High-Energy Distriibuted Energy Source Electromagnetic Railgun with Improved Energy Conversion | Michael M. Tower |
| 1984 | Development of a Modular Electromagnetic Launcher System for the Air Force Armament Laboratory | J. D'Aoust |
| 1984 | Development of Railgun Accelerator Combined with Two-Stage Ligh Gas Gun | Shu Usuba |
| 1984 | Distributed-Current-Feed and Distributed-Energy-Store Railguns | L. D. Holland |
| 1984 | Efficiency Equations of the Railgun | D. R. Sadedin |
| 1984 | Electrical and Thermal Modeling of Railguns | Jerry F. Kerrisk |
| 1984 | EMACK Electromagnetic Launcher Commisioning | D. W. Deis |
| 1984 | Evaluation of Superconducting Augmentation on Rail Gun Systems | C. G. Homan |
| 1984 | Experimental Demonstration of N-Turn EML | James G. Moldenhauer |
| 1984 | Fabrication of a Compact Storage Inductor for Railguns | M. L. Spann |
| 1984 | Further Development of Plasma-Armature Railgun Simulation Codes at MRL | D. D. Richardson |
| 1984 | Geometry of a Pulse Transformer for Electromagnetic Launching | D. R. Sadedlin |
| 1984 | High Energy Railgun Designs | J. Benford |
| 1984 | Instrumention for EM Launcher Systems | K. E. Nalty |
| 1984 | Investigation of the Residue in an Electric Rail Gun Employing a Plasma Armature | David P. Bauer |
| 1984 | LeRC Rail Accelerators: Test DDesigns and Diagnostic Techniques | L. M. Zane |
| 1984 | Measurements of the Spatial Distributions of Current in a Rail Gun Arc Armature | K. A. Jamison |
| 1984 | Mechanical Design Aspects of the Hyvax Railgun | W. E. Fox |
| 1984 | Metal Vapor Vacuum Arc Switch: Applications and Results | David Cope |
| 1984 | Multiple Stage Pulsed Induction Acceleration | Kenelm McKinney |
| 1984 | Multistage Induction Mass Accelerator | T. J. Burgess |
| 1984 | Performance Results of a Small-Calibre Electromagnetic Launcher | G. A. Clark |
| 1984 | Physical Scale Modeling to Verify Energy Storage Inductor Parameters | R. C. Zowarka |
| 1984 | Plasma Puffing from a Railgun Armature | Richard A. Marshall |
| 1984 | Producibility Improvements and Manufacture of a Prototype Commercial Compact Pulsed Homopolar Generator | J. M. Weldon |
| 1984 | Pulsed Power Requirements for Electromagnetic Launchers | W. F. Weldon |
| 1984 | Rail Accelerator Development for Ultra-High Pressure Research | R. S. Hawke |
| 1984 | Rail Damage and Armature Parameters for Different Railgun Rail Materials | A. J. Bedford |
| 1984 | Railgun Barrel Design and Analysis | L. Patch |
| 1984 | Railgun Damage in a Small Calibre Rail-Gun | A. J. Bedford |
| 1984 | Some Diagnostic Interpretations from Railgun Profile Experiments | D. F. Stainsby |
| 1984 | Switching Considerations and New Transfer Circuits for Electromagnetic Launch Systems | E. M. Honig |
| 1984 | Switching for Electric Rail Guns | John P. Barber |
| 1984 | Switching Overview -- Fundamental Issues | H. H. Woodson |
| 1984 | The DES Railgun Facility at CEM-UT | L. D. Holland |
| 1984 | The Electromagnetic Rocket Gun - a Novel Launch Concept | F. Winterberg |
| 1984 | The Elf-I Augment Electromagnetic Launcher | D. A. Fikse |
| 1984 | The Meat Grinder: Theoretical an Practical Limitations | Oved Zucker |
| 1984 | The Structural Response of a Rail Accelerator | S. Y. Wang |
| 1984 | The Use of Nested Chevron Rails in a Distributed Energy Store Railgun | Richard A. Marshall |
| 1984 | Theoretical Speed and Current Density Limits for Different Types of Electrical Brushes | Doris Kuhlmann-Wilsdorf |
| 1984 | Thermal-Energy Transfer From Arc to Rails in an Arc-Driven Rail Gun | John D. Powell |
| 1984 | Transient Response of Coaxial Pulse Coils | Scott Clifton |
| 1986 | A 10 MJ Cryogenic Inductor | D. T. Hackworth |
| 1986 | A 10-MJ Compact Homopolar Generator | B. D. McKee |
| 1986 | A Comparison of Armature Performance | John P. Barber |
| 1986 | A Launcher Barrel for the Lethality Test System Railgun | J. R. Sims |
| 1986 | A Meatgrinder Circuit for Energizing Resistive and Varying Inductive Loads (EM Guns) | K. Linder |
| 1986 | A Novel Simulation Approach for Electromagnetic Gun Barrels | Jere L. Brown |
| 1986 | A Parametric Evaluation of Railgun Augmentation | J. F. Kotas |
| 1986 | A Program to compute Magnetic Fields, Forces, and Inductances due to Solid Rectangular Conductors Arbitrarily Posistioned in Space | R. T. Honjo |
| 1986 | A Rail Gun Plasma Armature Model | D. A. Tidman |
| 1986 | A Rapid Fire Compulsator-Driven Railgun System | M. L. Spann |
| 1986 | Advanced Electromagnetic Gun Simulation | Jere L. Brown |
| 1986 | An Advanced EM Railgun Design | R. L. Hallse |
| 1986 | Analysis of an Inverse Railgun Power Source | John D. Powell |
| 1986 | Balancing the Current Distribution in the Current Collectors of Homopolar Machines Using Induced Voltage Gradients | Dennis Pavlik |
| 1986 | Chemically Vapor Deposted Materials for Railguns | J. T. Harding |
| 1986 | Commutating Direct Current Out of a vacuum Interrupter With a GTO Thyristor | Donald E. Johnson |
| 1986 | Compact Capacitor Powered Railgun Systems | M. F. Rose |
| 1986 | Computer Simulation of a Repetitive Energy Transfer System | M. E. Parton |
| 1986 | Design and construction of a Two-Stage Opening Switch | B. M. Rech |
| 1986 | Design of a 40 Megawatt Homopolar Generator | N. D. Baker |
| 1986 | Design of a Homopolar Generator for 400 m/s Slip Ring Velocity Brush Testing | J. H. Price |
| 1986 | Development of Railgun Accelerator at NCLI | Shu Usuba |
| 1986 | Distributed Energy Store (DES) Railgun Development | Charles H. Haight |
| 1986 | Electrode Erosion in High Current, High Energy Transient Arcs | A. L. Donaldson |
| 1986 | Electromagnetic Induction Launcher | M. D. Driga |
| 1986 | Electromagnetic Launched Projectile Compatibility | Michael M. Tower |
| 1986 | Electromagnetic Modeling of complex Railgun Geometries | J. A. Leurer |
| 1986 | Electromagnetic Railgun Extended-Life Bore Material Tests Results | George L. Jackson |
| 1986 | EMET Technology for Rail Launchers | R. L. Burton |
| 1986 | Experimental Measurement of Ablation Effects in Plasma Armature Railgunsq | Jerald V. Parker |
| 1986 | Fabrication of a Compensated Pulsed Alternator for a Rapid Fire Railgun System | M. D. Werst |
| 1986 | Final Design of the Control and Auxiliary Systems for the Balcones 60 MJ Homopolar Pulse Power Supply | D. J. Hilderbrand |
| 1986 | Final Manufacture and Assembly of a Modular 60 Megajoule Pulsed Homopolar Power Supply | W. L. Noble |
| 1986 | Focusing Experiments in Plasma Coaxial Railguns | M. D. Driga |
| 1986 | Future Trends for Compulsators Driving Railguns | S. B. Pratap |
| 1986 | HIgh Energy Rate of Surface Layers of Conductors | C. Persad |
| 1986 | HIMASS Electromagnetic Launcher at Los Alamos | E. L. Zimmermann |
| 1986 | HPG Operating Experience CEM-UT | J. H. Gully |
| 1986 | Improved Energy Density Hompolar Generator | W. A. Walls |
| 1986 | In-Bore Railgun Projectile Velocity | David P. Bauer |
| 1986 | Insulator Damage in High Current Discharges | P. M. Ranon |
| 1986 | Lethality Testing Involving Railgun Simulators | Raymond B. Gavert |
| 1986 | Measurement of Rail Gun Projectile Velocities by Shorted Transmission Line Techniques | M. L. Sloan |
| 1986 | Mechanism of Electrode Surface Damage and Materials Removal in High Current Discharges | A. Watson |
| 1986 | New High Current Meatgrinder Experiments | D. Giorgi |
| 1986 | Non-Ideal Plasma Behavior of Railgun Arcs | Y. C. Thio |
| 1986 | Non-Steady Phenomena i Railgun Plasma Armatures | K. A. Jamison |
| 1986 | Numerical Predictions of Railgun Performance Including the Effects of Ablation and Arc Drag | N. M. Schurr |
| 1986 | Observation and Analysis of Current Carrying Plasmas in a Railgun | R. W. Cook |
| 1986 | On the Design of an Integrated Metal Armature and Sabot for Railguns | Gerald L. Ferrentino |
| 1986 | Physics of Rail Gun Plasma Armatures | M. L. Sloan |
| 1986 | Plasma-Pulse-Accelerator | Juerden G. H. Salge |
| 1986 | Power Inductors Made by Powder Metallurgy | William S. Percival |
| 1986 | Predicting Bore Deformations and Launcher Stresses in Railguns | R. F. Davidson |
| 1986 | Preliminary Results from the Mulishot Opening Switch and Barrel Testing at ARDC | R. Berg |
| 1986 | Preliminary Study of a Propellant-Driven Pulsed MHD Generator-Powered, Small Caliber EML | Donald J. Butz |
| 1986 | Rail and Insulation Erosion In Rail Guns | R. F. Askew |
| 1986 | Rail Gun Experimental Results Due to Varying Bore and Arc Materials, and Varying the Number of Barrel Turns | J. E. Shrader |
| 1986 | Rail Gun Performance and Plasma Characteristics Due to Wall Ablation | Pradosh K. Ray |
| 1986 | Railgun Conductor Heating From Multiple Current Pulses | Jerry F. Kerrisk |
| 1986 | Railgun Current Density Distributions | G. C. Long |
| 1986 | Railgun Experiment at Tokyo Institute of Technology | Shu Usuba |
| 1986 | Railgun Insulator Materials Test | Randall B. Olsen |
| 1986 | Railguns Powered by Explosive Driven Flux Compression Generators | C. M. Fowler |
| 1986 | Recoil in Electromagnetic Railguns | W. F. Weldon |
| 1986 | Reliability Assurance in Electromagnetic Launch Technology | W. J. Kolarik |
| 1986 | Response Time for a High-Current Superconducting Switch | Osman K. Mawardi |
| 1986 | Selection and Evaluation of Insulator Materials for High Pressure Performance Railgun Bores | Stuart n. Rosenwasser |
| 1986 | Self Excitation of Iron Core Homopolar Generators | D. E. Perkins |
| 1986 | Simulation and Predicted Performance of the Balcones GEDI Experiment | A. Y. Wu |
| 1986 | Six Megajoule Rail Gun Test Facility | Michael M. Holland |
| 1986 | Small Caliber Mobile EML | D. J. Wehrlen |
| 1986 | Soft Acceleration of a Metal Plate by Rail Gun Plasma | William E. Drummond |
| 1986 | Spectroscopic Measurements of Muzzle Flash Plasma | John R. Uglum |
| 1986 | Structure of Plasma Armature of a Railgun | Richard A. Marshall |
| 1986 | Summary of EM Launcher Experiments Performed at LLNL | R. S. Hawke |
| 1986 | Superconducting Augmented Rail Guns (SARG) | C. G. Homan |
| 1986 | Superconductoring Field Coil for the High-Voltage Homopolar Generator | E. R. Johnson |
| 1986 | System Design of the Ultrahigh Velocity Gedi Experiment | R. L. Laughlin |
| 1986 | Technology of Thermal Hypervelocity Launchers | J. R. Powell |
| 1986 | Testing of a High Performance | D. R. Peterson |
| 1986 | Testing of a Homopolar Generator, Energy Storage Inductor, Opening-Switch Railgun System | R. C. Zowarka |
| 1986 | Testing of Coaxial Railguns in High Vacuum | J. L. Upshaw |
| 1986 | The 500 kA Repetitive Opening Switch | Tim McCormick |
| 1986 | The High Voltage Homopolar Generator | J. H. Price |
| 1986 | The Installation and Preliminary Test Programme of REMUN III - a 6.7 MJ HPG Driven Railgun | P. W. Reip |
| 1986 | The Lethality Test System | W. M. Parsons |
| 1986 | The Potential of Hydrogen Armature Experiments | William E. Drummond |
| 1986 | The Reconnction Gun | M. Cowan |
| 1986 | The TUM/LRT Electromagnetic Launchers | E. Igensbergs |
| 1986 | Thermal Design and Development of Actively Cooled Brushes for Compact Homopolar Generators | Derby B. Makel |
| 1986 | Two-Dimensional Diffusion in an EML Rail with Constant Properties | P. A. Drake |
| 1989 | 9 MJ Laboratory Gun and Range at The University of Texas at Austin | R. C. Zowarka Jr. |
| 1989 | A Compound Opening Switch for Electromagnetic Launch Applications | O. Zucker |
| 1989 | A Finite-Element Method for the Prediction of Joule Heating of Conductors in Electromagnetic Launchers | J. R. Auton |
| 1989 | A Series Wound Air Core Homopolar Generator: SWAC for Tactical Armor Applications | David Ohst |
| 1989 | A Solid State Switched Power Supply for Simultaneous Capacitor Recharge and Railgun Operation | Alex Zielinski |
| 1989 | A Study of Ablation Effects for an Axisymmetric Electromagnetic Accelerator | K. Ikuta |
| 1989 | A Study of Current Distribution in Electromagnetic Launcher Rails | V. K. Garg |
| 1989 | A Taxonomy of Electromagnetic Launchers | W. F. Weldon |
| 1989 | A Theoretical Model for the Physical Processes in the Confined High Pressure Discharges of Electrothermal Launchers | A. Loeb |
| 1989 | Advanced Compulsator Design | M. D. Driga |
| 1989 | Advanced Compulsators for Railguns | S. B. Pratap |
| 1989 | Advances in Opening Switch Technology at IAP Research | John |
| 1989 | An Interferometric Measurement Technique for Railgun Structures | Alex Zielinski |
| 1989 | An Investigation into the Potential for Multiple Rail Railguns | J. H. Beno |
| 1989 | Analytic Solutions to Dynamic Equations of Plasma Armature Railguns | M. Shahinpoor |
| 1989 | Application of Superconducting Technology to Earth-to-Orbit Electromagnetic Launch Systems | John R. Hull |
| 1989 | Arc Restrike in the Rail Accelerator | Pradosh K. Ray |
| 1989 | Armature Options for Hypervelocity Railguns | Lindsey D. Thornhill |
| 1989 | Balcones Homopolar Generator Power Supply | J. H. Gully |
| 1989 | Coaxial Plasma Accelerator with Compressor Coil and Radial Gas Injection | A. Hudepohl |
| 1989 | Compact Pulsed Transformer Power Conditioning System for Generating High Voltage, High Energy, Rapid | P. M. Ranon |
| 1989 | Composite Solid Armature Consolidation by Pulse Power Processing: a Novel Homopolar Generator Application in EML Technology | C. Persad |
| 1989 | Composites for Improved Armature Performance | D. E. Johnson |
| 1989 | Compulsator Research at The University of Texas at Austin--An Overview | M. L. Spann |
| 1989 | Confined High Pressure Discharge Experiments | N. Spector |
| 1989 | Continuous Measurements of In-Bore Projectile Velocity | J. R. Asay |
| 1989 | Cooling for the Armature Windings in a Repetitively Fired Air-Core Compulsator | Hsing-Pang Liu |
| 1989 | Design and Construction of a 5.7-MJ, 10-kV Multi-Stage Capacitor Power Supply | James M. Toms |
| 1989 | Design and Development of Extremely High Velocity Electromagnetic Launch Accelerators-GEDI Program | J. L. Upshaw |
| 1989 | Design and Operation of a High-Energy Railgun Facility | D. R. Peterson |
| 1989 | Design and Optimization of Hydrogen Cooled Pulsed Storage Inductors for Electromagnetic Launchers | Y. M. Eyssa |
| 1989 | Design and Power Conditioning for the Coil-Gun | Z. Zabar |
| 1989 | Design and Testing of a Mass-Stabilized Projectile for a Small Caliber, Electromagnetic Launcher | James Garner |
| 1989 | Design and Testing of Large-Bore, Ultra-Stiff Railguns | J. H. Price |
| 1989 | Design and Testing of Solid Armatures for Large-Bore Railguns | J. H. Price |
| 1989 | Design Considerations for Compulsator Driven Railguns | D. Putley |
| 1989 | Design Considerations in a 60 Caliber Electromagnetic Railgun System | C. W. G. Fulcher |
| 1989 | Design of a Self-Excited, Air-Core Compulsator for a Skid-Mounted Repetitive Fire 9 MJ Railgun System | W. A. Walls |
| 1989 | Development of Railgun Accelerator at ISAS | Masahisa Yanagisawa |
| 1989 | Direct Measurement of Rail Resistance | David P. Bauer |
| 1989 | DTRC Laboratory Electromagnetic Accelerator System Design, Modeling and Simulation | F. P. Emad |
| 1989 | Electromagnetic Acceleration Activities at the French-German Research Institute Saint-Louis (ISL) | V. Wegner |
| 1989 | Electromagnetic Earth-to-Space Launch | Harry D. Fair |
| 1989 | Electromagnetic Gun/Projectile Interface Considerations | William J. Creighton |
| 1989 | Electromagnetic Launch Technology: the Promise and the Problems | Hans Mark |
| 1989 | Electromagnetic Launchers for Space Applications | J. M. Schroeder |
| 1989 | Electromagnetic Space Launch: a Re-Evaluation in Light of Current Technology and Launch Needs and Feasibility of a Near Term Demonstration | Miles R. Palmer |
| 1989 | Electrothermal Accelerators: the Power Conditioning Point of View | M. D. Driga |
| 1989 | EMACK Improvements, Present and Future | H. A. Calvin |
| 1989 | EML Switching Technology | Henry Kolm |
| 1989 | Energy Storage Transformers-MAPPS Test Results | D. E. Johnson |
| 1989 | Experimental Measurement of Railgun Performance | K. Sato |
| 1989 | Experimental Progress at the ARDEC Electromagnetic Launch Facility | J. A. Pappas |
| 1989 | Explosive Foil Injection (EFI) Pre-Accelerator for Electromagnetic Launchers | R. A. Burden |
| 1989 | Explosive Opening Switch Work at Westinghouse | E. Aivaliotis |
| 1989 | Fabrication Issues and Technology Development for HELEOS | A. R. Susoeff |
| 1989 | Feasibility of a Railgun Energy Recovery Circuit | M. E. Parten |
| 1989 | Formulation and Implementation of the Current Filament Method for the Analysis of Current Diffusion | A. Y. Wu |
| 1989 | Friction and Ablation Measurements in a Round Bore Railgun | S. Aigner |
| 1989 | High Performance Disk Alternators | Peter Mongeau |
| 1989 | High Power Switches at the Center for Electromechanics at the University of Texas at Austin | R. L. Sledge |
| 1989 | High Velocity Contact Properties | John P. Barber |
| 1989 | Improved Pulse Power Sources with High-Energy Density Capacitor | Ho-Lun Lee |
| 1989 | In-bore Armature Contact Voltage Measurement | Brian L. Maas |
| 1989 | Induction Launcher Design Considerations | M. D. Driga |
| 1989 | Inductive Programmed Generator for Electrothermal Guns | M. Kanter |
| 1989 | Insights Gained from Tests of Solid Armatures with and Without Payload in a 15 mm EML | Doris Kuhlmann-Wilsdorf |
| 1989 | Limits to the Velocity of Solid Amatures in Railguns | Glen C. Long |
| 1989 | Magnetic Advanced Hybrid (MAH) Gun | M. A. Hilal |
| 1989 | Mass Acceleration by Plasma Pulses | Jurgen G. H. Salge |
| 1989 | Mass Penalties in DC HPG Design | Antonios Challita |
| 1989 | Measurements of Plasma Properties from a Large Bore, Plasma Armature Railgun | K. A. Jamison |
| 1989 | Mesh-Matrix Analysis Method for Electromagnetic Launchers | David G. Elliott |
| 1989 | Novel Scheme for Space Power Generation and Energy Storage | Enrico Levi |
| 1989 | Operating Principles of the Ultracapacitor | G. L. Bullard |
| 1989 | Optical Diagnostics of Railgun Plasma Armatures | Dennis Keefer |
| 1989 | Physical Scale Modeling to Predict Current Diffusion in Solid Armatures | J. A. Pappas |
| 1989 | Physics Experiments on the GEDI EMET Facility | F. D. Witherspoon |
| 1989 | Plasma Analysis of a Large-Bore, Arc-Driven Railgun | John D. Powell |
| 1989 | Plasma Armature Formation in High-Pressure, High-Velocity Hydrogen | R. S. Hawke |
| 1989 | Plasma Armature Railgun Launcher Simulations at the University of Texas at Austin | D. A. Weeks |
| 1989 | Plasma Behavior in the Boundary Layer Near a Railgun Surface | Sang-Wook Kang |
| 1989 | Preliminary Results of a Battery-Based, Multi Megawatt 200 kA Pulsed Power Supply | W. Karthaus |
| 1989 | Producing and Gauging Precision Railgun Bores | D. R. Peterson |
| 1989 | Projectile Launching by an Electrothermal Gun | M. Guillemot |
| 1989 | Prototype Development of a Battery Power Supply at the Electromagnetic Launcher Research Facility | James B. Cornette |
| 1989 | Pulse Discharge Control and Machine Protection for a Multi-Discharge Compulsator | R. F. Thelen |
| 1989 | Railgun Rail Gouging by Hypervelocity Sliding Contact | L. M. Barker |
| 1989 | Reliability and Maintainability Tradeoff Study for Repetitive Electromagnetic Launch Systems | W. J. Kolarik |
| 1989 | Resistive Commutation at Megampere Current Levels | John P. Barber |
| 1989 | Review of Impact Fusion Concepts (EM Launchers) | F. L. Ribe |
| 1989 | Scaling Relationships for Plasma Driven Railguns | G. L. Jackson |
| 1989 | Skin and Heating Effects of Railgun Current | J. C. Nearing |
| 1989 | Spatial Characteristics of the EML Plasma Armature and the Dependence on Plasma Composition | R. J. Zollweg |
| 1989 | STARFIRE: Hypervelocity Railgun Development for High-Pressure Research | R. S. Hawke |
| 1989 | State-of-the-Art Insulator and Electrode Materials for use in High Current High Energy Switching | A. L. Donaldson |
| 1989 | Structural Consequences of Railgun Augmentation | G. W. Wellman |
| 1989 | Structural Design of Cylindrical Railguns | E. P. Fahrenthold |
| 1989 | Summary of Experimental Results Using the REMGUN III HPG Facility | A. R. P. Bloyce |
| 1989 | Testing of a Rapid-Fire Compensated Pulsed Alternator System | M. D. Werst |
| 1989 | The Culham Laboratory Hypervelocity Test Facility | M. J. Kear |
| 1989 | The Development of an Electromagnetic Launcher for Tactical Weaponization | John Martin |
| 1989 | The Effect of Rail Resistance on Railgun Efficiency | D. E. Johnson |
| 1989 | The Mechanical Design of Armatures | John P. Barber |
| 1989 | The Performance of New, Redesigned Ignitron Tubes in Axial Magnetic Fields | D. L. Adkins |
| 1989 | The Pulse Physics Research Program of the Netherlands Organization for Applied Scientific Research TNO | Willem J. Kolert |
| 1989 | The Ringer: an Efficient, High Repetition Rate Circuit for Electromagnetic Launchers | D. Giorgio |
| 1989 | The role of Convective Flow Processes in Determining Plasma Armature Characteristics | M. L. Sloan |
| 1989 | The Self-Excited Homopolar Generator. Part II. Mechanical and Thermal Design | A. J. Mitcham |
| 1989 | The Self-Excited Homopolar Generator. Part I. Theory and Electrical Design | A. J. Mitcham |
| 1989 | The SRS Railgun: a New Approach to Restrike Control | Jerald V. Parker |
| 1989 | The use of Finite Element Analysis Techniques for Solving Rail Gun Problems | S. P. Atkinson |
| 1989 | Thermal Analysis of Fiber Armatures | W. Craddock |
| 1989 | Thermodynamic and Transport Properties of EML Plasma Armatures | R. J. Zollweg |
| 1989 | Transient Magnetohydrodynamic Liquid-Metal Flows in a Rectangular Channel with a Moving Conducting Wall | Fredrick J. Young |
| 1989 | Transient Modelling of Railgun Plasma Armatures | Glenn E. Rolader |
| 1989 | Traveling-Wave Induction Launchers | David G. Elliott |
| 1989 | Two Dimensional Time Dependent MHD Simulation of Plasma Armatures | M. A. Huerta |
| 1989 | United Kingdom EM Gun Programme | S. P. Atkinson |
| 1989 | Use of a Two-Stage Light-Gas Gun as an Injector for Electromagnetic Railguns | M. Shahinpoor |
| 1989 | Velocity Skin Effect with Plasma Armature | John R. Uglum |
| 1989 | Wear of Conductors in Railguns: Metallurgical Aspects | C. Persad |
| 1989 | Why Plasma Armature Railguns Don't Work (and What Can be Done About it) | Jerald V. Parker |
| 1991 | A 10-Stage Reconnection Demonstration Launcher | Eugene C. Cnare |
| 1991 | A Control Algorithm for Reluctance Accelerators | S. K. Ingram |
| 1991 | A Field Based, Self-Excited Compulsator Power Supply for a 9 MJ Railgun Demonstrator | W. A. Walls |
| 1991 | A Gage for Measuring Heat Transfer to the Bore of Electromagnetic Railguns | T. Craig Derbidge |
| 1991 | A More General Model for Determination of Plasma Armature Current Distribution from B-Dot Voltage by Method of Least Squares | Kenneth K. Cobb |
| 1991 | A New Approach to a High Efficiency Inductive Store | R. C. Zowarka Jr. |
| 1991 | A Revolution in Access to Space Through Spinoffs of SDI Technology | M. R. Palmer |
| 1991 | A Second Generation EMET Railgun for Secondary Arc Studies | F. D. Witherspoon |
| 1991 | A Symmetrical Rail Accelerator | E. Igenbergs |
| 1991 | A Technique to Reduce Plasma Armature Formation Voltage | Keith A. Jamison |
| 1991 | Active Current Management for Four-Rail Railguns | J. H. Beno |
| 1991 | Advanced Concepts for Electromagnetic Launcher Power Supplies Incorporating Magnetic Flux Compression | M. D. Driga |
| 1991 | Air Force Armament Laboratory (AFATL) Battery Power Supply (BPs) Operations and Maintenance | J. R. Delaney |
| 1991 | An Actively Switched Pulsed Induction Accelerator | M. W. Ingram |
| 1991 | An Electrostatic Accelerator for Ultrahypervelocity Microprojectiles | D. Conte |
| 1991 | An Empirical Model for Plasma Armature Voltage | Jerald V. Parker |
| 1991 | An Experiment to Measure the Mass Density of a Plasma Armature | John W. Rogers |
| 1991 | Analysis of Induction-Type Coilgun Performance Based on Cylindrical Current Sheet Model | J. L. He |
| 1991 | Apparatus and Practices for Electrical Noise and Shock Hazard Abatement in Pulsed Power Environments | Dennis J. Hildenbrand |
| 1991 | Armature Design for Coaxial Induction Launchers | J. A. Andrews |
| 1991 | Concept of a Modified Flywheel for Megajoule Storage and Pulse Conditioning | Ted T. Leung |
| 1991 | Conformal Mapping Calculation of Railgun Skin Inductance | M. A. Huerta |
| 1991 | Contact Transition in Metal Armatures | J. P. Barber |
| 1991 | Design & Fabrication of an Advanced, Lightweight, High Stiffness, Railgun Barrel Concept | Daniel L. Vrable |
| 1991 | Design and Modeling Considerations for Experimental Railgun Armatures | D. A. Sink |
| 1991 | Design and Operational Considerations of a Fully Integrated Control and Data Acquisition System for Homopolar Pulse Power Supplies | D. J. Hildenbrand |
| 1991 | Design and Performance of a Multi-Stage Cylindrical Reconnection Launcher | Ranald J. Kaye |
| 1991 | Design and Testing of a 0.60 Caliber, Augmented Railgun | R. L. Fuller |
| 1991 | Design Criteria for Brush Commutation in High Speed Traveling Wave Coilguns | W. R. Snow |
| 1991 | Design Limitations for Small Caliber Electromagnetic Saboted Rod Projectiles | Alexander E. Zielinski |
| 1991 | Design of a Reluctance Accelerator | D. A. Bressie |
| 1991 | Development of Advanced Ceramic Matrix Composite Insulators for Electromagnetic Railguns | R. Daniel Stevenson |
| 1991 | Developments in Diagnostics, Instrumentation and Facilities | Eugene J. Clothiaux |
| 1991 | Distributed Energy Store Railgun: the Limiting Case | Richard A. Marshall |
| 1991 | Dynamic Strength of Armature Materials Under Pulsed Current Conditions | Duane C. Newman |
| 1991 | Effect of In-Bore Gas on Railgun Performance | Glenn E. Rolader |
| 1991 | Electromagnetic Acceleration Studies with Augmented Rails | Toshiaki Maruo |
| 1991 | Electron Emission at the Rail Surface | Lindsey Thornhill |
| 1991 | EMGWS, D1 Projectile Tests | William J. Creighton |
| 1991 | Estimating the Erosion and Degradation Performance of Ceramic and Polymeric Insulator Materials in High Current Arc Environments | T. G. Engel |
| 1991 | Experimental Determination of Square Bore and Parallel Configuration EML Rail Inductance Per Unit Length | Kenneth K. Cobb |
| 1991 | Experimental Indication of a Buffer Zone Between the Plasma Armature of an EML and the Projectile | Eugene J. Clothiaux |
| 1991 | Experimental Observations of Plasma Armature Properties and Characteristics | Mary C. Baker |
| 1991 | Experimental Results from CEM-UT's Single Shot 9 MJ Railgun | R.J. Hayes |
| 1991 | Exploratory Development of the Reconnection Launcher 1986-1990 | M. Cowan |
| 1991 | E/M launcher Vibration and Acceleration Data Analysis | Ribert G. Grzesik |
| 1991 | Final Commissioning of the Balcones 60 MJ Pulsed Power Supply | Robert W. Bray |
| 1991 | Final Design of an Air Core, Compulsator Driven, 60 Caliber Railgun System | J. R. Kitzmiller |
| 1991 | Finite Conductivity and the Interface Filamentation Instability in Railgun Arcs | M. A. Huerta |
| 1991 | Guidelines for the Design of Synchronous-Type Coilguns | E. Levi |
| 1991 | Heavy-Duty Explosively Operated Pulsed Opening and Closing Switches: Reducing Cost and Turnaround Time | D. R Peterson |
| 1991 | High Energy Cable Development for Pulsed Power Applications | Keith A. Jamison |
| 1991 | High-Coulomb Spark Gap for Electric Guns | H. G. Hammon III |
| 1991 | Hypervelocity Macroparticle Accelerator Experiments at CEM-UT | D. A. Weeks |
| 1991 | Hypervelocity Projectile Development for Electromagnetic Guns | T. E. Hayden |
| 1991 | Impact Performance of Large Scale Electromagnetic Launchers | E. P. Fahrenthold |
| 1991 | In-Bore Instrumentation/Diagnostics for Large-Bore EMLs | Michael J. Fernandez |
| 1991 | Induction Generator Powered Coaxial Launchers | K. E. Nalty |
| 1991 | Inductively Commutated Coilguns | Peter P. Mongeau |
| 1991 | Large and Small Caliber Railgun Solid Armatures- Experimental Results | J. H. Price |
| 1991 | Lightweight High-Efficiency Energy-Storage Transformers | Donald E. Johnson |
| 1991 | Limitations on the Minimum Charging Time for the Field Coil of Air Core Compensated Pulsed Alternators | S. B. Pratap |
| 1991 | Liquid Metal Switches for Electromagnetic Railgun Systems | A. J. Mitcham |
| 1991 | Mass Sensitivity Studies for an Inductively Driven Railgun | J. J. Scanlon III |
| 1991 | Mass Stabilized Projectile Designs for Electromagnetic Launch | Alexander E. Zielinski |
| 1991 | Measurement of the Velocity Skin Effect | Leo E. Thurmond |
| 1991 | Measurements at the ISL-EMA 1 Railgun Facility | J. Wey |
| 1991 | Metal-to-Metal-Switches for Large Currents | Dieter W. Schade |
| 1991 | Micrometeoroid Impact Simulations Using a Railgun Electromagnetic Accelerator | J. L. Upshaw |
| 1991 | Minimizing the Mass of a Potential Railgun Power Supply | Donald E. Johnson |
| 1991 | Modelling Electromagnetic Rail Launchers at Speed Using 3D Finite Elements | D. Rodger |
| 1991 | Muzzle Shunt Augmentation of Conventional Railguns | Jerald V. Parker |
| 1991 | New Solid Armature Design Concept | Robert M. Del Vecchio |
| 1991 | Observations on the Limit Velocity of Plasma Armatures | John P. Barber |
| 1991 | On the Design and Testing of Solid Armatures for Rail Accelerator Applications | W. Karthaus |
| 1991 | Opening Switches for a 5 MJ, 1 MA Energy Storage Transformer | Neal D. Clements |
| 1991 | Parameter Studies for Traveling Wave Coaxial Launchers | A. Y. Wu |
| 1991 | Parametric Approach to Linear Induction Accelerator Design | D. A. Bresie |
| 1991 | Performance Calculations for Battery Power Supplies as Laboratory Research Tools | J. J. Scanlon III |
| 1991 | Performance Criteria for EM Rail Launchers with Solid or Transition Armatures and Laminated Rails | T. E. James |
| 1991 | Performance of the Discrete Electrode Railgun | S. Usaba |
| 1991 | Plasma Diagnostics for High Power Ignitron Development | D. L. Loree |
| 1991 | Post-Shot Analysis of Plasma/Rail Interaction in a Small Bore Load Driving EML | Joshua O. Kolawole |
| 1991 | Power Supply Technology for Electric Guns | J. H. Gully |
| 1991 | Power System Modelling for a Tactical Railgun Demonstrator | D. Putley |
| 1991 | Pre-Accelerator Design by Estimation of Erosion | Hideaki Kashii |
| 1991 | Principles of Application of High Temperature Superconductors to Electromagnetic Launch Technology | C. E. Oberly |
| 1991 | Radiation Transport Through a Plasma Boundary Layer Between Armatures and Material Surfaces | Dohee Hahn |
| 1991 | Rail Gun Experiment (HYPAC) at ISAS | Akira Yamori |
| 1991 | Railgun Hybrid Armatures, Experimental Results and Performance Characteristics | Roger Crawford |
| 1991 | Railgun Performance with a Two-Stage Light-Gas Gun Injector | R. S. Hawke |
| 1991 | Recent Advances in Large Railgun Structures and Materials Technology | Stuart N. Rosenwasser |
| 1991 | Recommissioning and Characterization of the Ardec 30 Megajoule Homopolar Generator | T. J. Coradeachi |
| 1991 | Reinforced Aluminium Conductor for Cryogenic Applications | M. K. Premkumar |
| 1991 | Resistance Measurements on a Gas Discharge Switching Device and on Projectile Plasma Armatures for EML Applications | R. Kalstrom |
| 1991 | Review of Armature Research | Jad H. Batteh |
| 1991 | Rotating Machines-Power Supplies for the Next Generation of EM Accelerators | M. L. Spann |
| 1991 | Semiconductor Elements in the Power Supply Circuit of Electric Gun Systems | T. Karasinski |
| 1991 | Simulation of Selective Passive Compensation | C. R. Spikings |
| 1991 | Simultaneous In-Bore Rail and Insulator Spectra from a Railgun Plasma Armature | Dennis Keefer |
| 1991 | Spectroscopic Investigation of the RGS-II Plasma Armature | Byron D. Barrett |
| 1991 | Stiff Railguns | W. F. Weldon |
| 1991 | Structural Design Issues for Electromagnetic Projectiles | K. A. Bannister |
| 1991 | Studies to Reduce Material Erosion in Electrothermal Launchers | J. Gilligan |
| 1991 | Surface Potential Distributions Due to Eddy Currents Around Long Cracks in Metals, Induced By U-Shaped Current Carrying Wires | S. H. H. Sadeghi |
| 1991 | Ten Megacoulomb Switching Operation for the Air Force Battery Powered Inductive Storage Launcher Research Facility | R. B. Klug |
| 1991 | Test Results for Three Prototype Models of a Linear Induction Launcher | Z. Zabar |
| 1991 | The 10 KM/S, 10 KG Railgun | Richard A. Marshall |
| 1991 | The CEM-UT Rapid-Fire Compulsator Railgun System-Recent Performance and Development Milestones | D. E. Perkins |
| 1991 | The Electrodynamics of Railgun Plasma Armatures | P. A. Davidson |
| 1991 | The EMET Railgun Projectile | R. L. Burton |
| 1991 | The HART I Augmented Electric Gun Facility | D. A. Fikse |
| 1991 | The Impact of Acceleration on Barrel/Launch Package Design | James A. Ang |
| 1991 | The Internal Structure and Dynamics of the Railgun Plasma Armature Between Infinitely Wide Ablating Rails | Michael H. Frese |
| 1991 | The Origin and Future of Composite Aluminium Conductors | C. E. Oberly |
| 1991 | The Plasma-Gun Augmented Electrothermal Accelerator | M. Rott |
| 1991 | The Preliminary Feasibility of Intercalated Graphite Railgun Armatures | James R. Gaier |
| 1991 | The Railgun Force in the Presence of Secondary Arcs | Hugh A. Calvin |
| 1991 | The Way Ahead | Eric R. Laithwaite |
| 1991 | Three-Dimensional Rail Cooling Analysis for a Repetitively Fired Railgun | H. P. Liu |
| 1991 | Three-Dimensional Rail-Current Distribution Near the Armature of Simple, Square-Bore, Two-Rail Railgun | J. H. Beno |
| 1991 | Thunderbolt | Ian R. Mcnab |
| 1991 | Time Resolved Optical Diagnostic Methods for Electric Gun Systems | T. Karasinski |
| 1991 | Transient Performance of Linear Induction Launchers Fed by Generators and by Capacitor Banks | J. L. He |
| 1991 | Traveling-Wave Synchronous Coil Gun | David G. Elliot |
| 1991 | Two-Dimensional Current Density and Temperature Development in the Return Rail of an EM launcher with Temperature-Depentent Properties | P. A. Drake |
| 1991 | Two-Dimensional Heat Conducting Simulation of Plasma Armatures | M. A. Huerta |
| 1991 | UV Absorption of the In-Bore Plasma Emission from an EML Using Polycarbonate Insulators | Eugene J. Clothiaux |
| 1991 | Visualization of Plasma-Fluid Mixing Through X-ray Shadowgraphy | Aurel Faibis |
| 1991 | WARP-10: A Numerical Simulation Model for the Cylindrical Reconnection Launcher | Melvin M. Widner |
| 1993 | 1 MJ electric gun facility at LLNL | R. S. Lee |
| 1993 | 1.2 MW DC-DC Converter | W. G. Homeyer |
| 1993 | 2-D MHD Numerical Simulations of EML Plasma Armatures with Ablation | G. C. Boynton |
| 1993 | 25 kA, 5000 V Solid State Opening Switch for Inductive Energy Stores | E. E. Bowles |
| 1993 | 52 Megajoule Electric Gun Test Facility | T. Coradeschi |
| 1993 | 9 MJ Range Gun Compulsator Stator Design and Fabrication | J. D. Herbst |
| 1993 | A Coilgun Design Primer | Barry Marder |
| 1993 | A Comprehensive, Numerical Model of Electro-Thermal Propulsion | N. Silvestre |
| 1993 | A Mechanical Connector Design for High-Current, High-Coulomb Pulsed Power Systems | A. R. Susoeff |
| 1993 | A Momentum Limit for Electromagnetic Railguns | M.Cowan |
| 1993 | A Multiple Armature Railgun Launcher | Antonios Challita |
| 1993 | A Numerical Model for ETC Gun Interior Ballistics Applications | C.-C. Hsiao |
| 1993 | A Parametric Study for an Electrothermal-Chemical Artillery Weapon | Clive R. Woodley |
| 1993 | A Projectile-Oriented, Design Study for a Cannon-Caliber Electromagnetic Launcher | Alexander E. Zielinski |
| 1993 | A Pulse Forming Network and Test Fixture for Screening Electrothermal Chemical Candidate Propellants | Duk I. Chang |
| 1993 | A Pulse Forming Network Design for Blocked-Bore Plasma Armature Experiments | William J. Carey |
| 1993 | A System Overview of the Technology Development Issues for Fieldable EML Barrels | Duane C. Newman |
| 1993 | A Tool for Force Model Analysis for Plasma Armature Railguns | Kenneth K. Cobb |
| 1993 | A Triggering Mechanism for Secondary Arcs | Hugh A. Calvin |
| 1993 | Advanced Compulsator Technology | S. B. Pratap |
| 1993 | Advanced Railgun Experimental Test Results and Implications for the Future | Michael M. Holland |
| 1993 | Advanced-Performance Macroparticle Accelerators: Polyphase Railguns | M. D. Driga |
| 1993 | An Experimental Investigation of Plasma Armature Railgun Performance in the 3.2 to 4.2 km/s Regime | Donald M. Littrell |
| 1993 | An Investigation of Electromagnetic Launch Repeatability | James B. Cornette |
| 1993 | Analysis of Experimental Data from a 50-mm Railgun Driven by a 5-MJ Capacitor Power Supply | James J. Scanlon III |
| 1993 | Analysis of the Performance of Tubular Pulsed Coil Induction Launchers | P. J. Leonard |
| 1993 | Applications of Electric Launch Systems | Harry D. Fair |
| 1993 | Arc Behavior Driven by Electromagnetic Force Between Rail Electrodes | K. Koyama |
| 1993 | Augment Railgun and Sequential Discharge | K. Kobayashi |
| 1993 | Balloting Motion of SLEKE Launch Packages in EM Railguns | Szu Hsiung Chu |
| 1993 | Barrel Lateral Force Modeling of a Curved EM Railgun | Szu Hsiung Chu |
| 1993 | Battery Power Supply for the Navy Electromagnetic Torpedo Launcher | Jack R. Lippert |
| 1993 | Behavior of Azimuthal Currents Induced in the Projectile of the Linear Induction Launcher [LIL] | X. N. Lu |
| 1993 | BTI/Army Pulse Power Module | Bradley D. Goodell |
| 1993 | BUS High Current Battery Model | J. P. Kajs |
| 1993 | Capillary Discharge in the Electrothermal Gun | John D. Powell |
| 1993 | Coaxial Electromagnetic Launcher Calculations Using FE-BE Method and Hybrid Potentials | J. H. Chang |
| 1993 | Coilgun Structures | J. A. Andrews |
| 1993 | Coilgun Technology at the Center for Electromechanics, the University of Texas at Austin | D. A. Bresie |
| 1993 | Commissioning of a Metal Vapor Laser for the Illumination of High Speed Motion Pictures | D. J. Wehrlen |
| 1993 | Comparative Study of Component Erosion for Electromagnetic and Electrothermal Launchers | M. A. Bourham |
| 1993 | Controls and Giagnostics on a Fuseless Railgun For Solid Hydrogen Pellet Acceleration | T. L. King |
| 1993 | Data Acquisition Applications for Long Duration Electromagnetic Launcher Experiments | Mark W. Heyse |
| 1993 | Design and Fabrication of a Tandem, Five Megampere Initiate Switch for the Battery Upgraded Supply | T. A. Aanstoos |
| 1993 | Design and Performance of Sandia's Contactless Coilgun for 50 mm Projectiles | Ronald J. Kaye |
| 1993 | Design of a 500 MJ, 5 MA Power Supply | J. A. Pappas |
| 1993 | Design of a Dissipation Circuit for a 560 MJ Inductive Storage Supply | J. L. Upshaw |
| 1993 | Design of a Rising Frequency Generator/Coaxial Accelerator | D. A. Weeks |
| 1993 | Design, Analysis, and Fabrication of Two Lightweight, High L' Railguns | R. L. Laughlin |
| 1993 | Design, Development, and Testing of a Lightweight, Composite Sabot for the D-2 Program | David McGaughey |
| 1993 | Determination of Jerk, Acceleration, and Magnetic Field Loadings on a Projectile Launched From an Electromagnetic Railgun | James J. Scanlon III |
| 1993 | Determining the Lorentz Forces in Plasma Armatures | Michael L. Huebschman |
| 1993 | Development and Validation of the ARDEC Army Railgun Modular Simulator (ARMS) | Dennis J. Hildenbrand |
| 1993 | Development of a Confined Plasma Armature Design (CPAD) | Moreno White |
| 1993 | Development of a Fuseless Small-Bore Railgun for Injection of High-Speed Hydrogen Pellets into Magnetically Confined Plasmas | K. Kim |
| 1993 | Development of a Linear Piston-Type Pulse Power Electric Generator for Powering Electric Guns | Martin Summerfield |
| 1993 | Development of an Advanced Electromagnetic Gun Barrel | T. W. Hurn |
| 1993 | Distributed Energy Store Powered Railguns for Hypervelocity Launch | Brian L. Maas |
| 1993 | Distribution and Grounding Issues Involved in Naval Ship Integration of an Electric Gun System | John Dentler |
| 1993 | DTRC Electromagnetic Launcher with Feedback Control | F. P. Emad |
| 1993 | Dynamic Behavior of an Explosive Opening Switch | Glenn E. Rolader |
| 1993 | Dynamic Bore/Interaction Effects on Metal Armature Performance | Gregory A. Hanlin |
| 1993 | Dynamic Simulation of Capacitor-Based Electric Gun Systems for Naval Applications | Scott Fish |
| 1993 | Earth-to-Orbit Railgun Launcher | J. L. Brown |
| 1993 | Effect of a Transient Current Profile on the Dynamics of Railgun Arcs | Jad H. Batteh |
| 1993 | Electric Energy Weapon Implementation on an Airborne Platform | Jerome L. Brown |
| 1993 | Electromagnetic Force, Jerk, and Electric Gun Projectiles | R. C. Zowarka |
| 1993 | Electromagnetic Gun Circuit Analysis Code (EGCAC) | Glenn E. Rolader |
| 1993 | Electromagnetic Launcher Control Using Finite State Machines | Jeffrey M. Gay |
| 1993 | Electrothermal Design Aspects of Transitioning Solid Armatures | A. J. Schoolderman |
| 1993 | Electrothermal Light Gas Gun | Electrothermal Light Gas Gun |
| 1993 | Electrothermally Augmentation of a Solid Propellant Launcher | Z. Zaplan |
| 1993 | Electrothermally Generated Gasdynamic Pressure Pulses for Mass Acceleration | Harald W. Fien |
| 1993 | End-to-End Modeling of Electrothermal Launchers | Lindsey Thornhill |
| 1993 | Equivalent Circuits and Parameters for Induction-Type Electromagnetic Launchers | J. L. He |
| 1993 | Evolutionary Development of the Multi-Function 'RAP' Explosive Operated Switching Cartridge | Richard D. Ford |
| 1993 | Experimental Comparison of Conventional and Trans-Augmented Railguns | J. Taylor |
| 1993 | Experimental Results from Solid Armature Tests at the Center for Electromechanics at the University | R. J. Hayes |
| 1993 | Experimental Study of Solid Armatures for EML Applications | Pascale Lehmann |
| 1993 | External Magnetic Field Influence on the Behaviour of Arc-Driven Railguns | G. Becherini |
| 1993 | Fabrication of a Rotor for a Field Based, Self-Excited Compulsator Power Supply for a 9 MJ Railgun Demonstrator | S. M. Manifold |
| 1993 | Finite Element Analysis of Transient Electromagnetic Heating Effects in Three Dimensions | S. H. Le G. Bisson |
| 1993 | Fundamental Research and Numerical modelling of the Internal Ballistics of Electrothermal Chemical Guns | Derrick Hewkin |
| 1993 | Further Investigations of Plasma Armature Performance in the Culham Laboratory HTF Rail Launcher | N. Herring |
| 1993 | Hall Effect Degradation of Rail Gun Performance | E. A. Witalis |
| 1993 | HART Hypervelocity Augmented Railgun Test Facility | M. Bruce Schulman |
| 1993 | HERA Railgun Facility at Texas Tech University | Michael Day |
| 1993 | High Performance Railgun Barrels for Laboratory Use | David P. Bauer |
| 1993 | High Transition Velocities for Solid Armatures in the 10-mm MTR Railgun | N. Colon |
| 1993 | Hypervelocity Projectile Design and Fabrication | James A. Ang |
| 1993 | Insulator and Electrode Mass Erosion and Surface Voltage Holdoff Recovery for Transient, High Current Surface Discharges | T. G. Engel |
| 1993 | Interchange Instability in Finite Conductivity Accelerated Plasma Arcs | M. Bourouis |
| 1993 | Investigation of an Alternator Charged Pulse Forming Network with Flywheel Energy Storage | J. H. Gully |
| 1993 | Investigation of Plasma-Augmented Solid Propellant Interior Ballistic Processes | Joseph R. Grieg |
| 1993 | ISL 500 kJ 15 mm Railgun Numerical Simulation | Philippe Kienner |
| 1993 | Light Activated Solid-State Opening Switches | R. A. Petr |
| 1993 | Limiting Physics Effects in Hypervelocity Railguns | K. D. Pyatt |
| 1993 | Magnetic Design for Structural Stiffness: the Tailored Railgun | Dennis R. Peterson |
| 1993 | Magnetic Vapor Shielding Mechanism in Electromagnetic and Electrothermal Launchers | J. G. Gilligan |
| 1993 | Manufacturing and Testing of an Air-Core Compulsator Driven 0.60 Caliber Railgun System | J. R. Kitzmiller |
| 1993 | Mathematical Formulation of 2D and 3D Finite and Boundary Element Model for Transient Electric Fields in High Performance Capacitors | Albert Wu |
| 1993 | Measurements of Experimental Plasma Brush Behavior in Hybrid Armatures | R. S. Hawke |
| 1993 | Mid-Push Plasma Armatures for Long-Rod Electromagnetic Gun Projectiles | Rolf Dethlefsen |
| 1993 | Midterm to Far Term Applications of Electromagnetic Guns and Associated Power Technology | Miles R. Palmer |
| 1993 | Mobile Pulse Power Systems for Electric Gun Tests | T. Pfenning |
| 1993 | Modelling of Electromagnetic Interferences Produced by a Railgun | F. Canavero |
| 1993 | Modelling the Electromagnetic Performance of Moving Rail Gun Launchers Using Finite Elements | D. Roger |
| 1993 | Motivation for a Near Term Gun Launch to Space Demonstration and a Variable Inductance Power Supply | Miles R. Palmer |
| 1993 | Multi-Rail Barrel Design and Performance | Brian L. Mass |
| 1993 | Multiphase Railgun Systems: a New Concept | S. K. Murthy W. F. Weldon |
| 1993 | Multiple Traveling Wave Electromagnetic Rotating Power Supplies: FEM Field Modeling | K. T. Hsieh |
| 1993 | Non-Arcing Commutation in Explosive Opening Switches | John P. Barber |
| 1993 | Novel Hybrid XRAM Current Multiplier | Richard D. Ford |
| 1993 | Numerical Simulations of Plasma Brush Behavior in Hybrid Armatures | R. S. Hawke |
| 1993 | Operating Experience with the 90 mm Railgun at CEM-UT | J. J. Hahne |
| 1993 | Optimization of the Power Circuit for Most Efficient Performance of ISAS Railgun (HYPAC) | Akira Yamori |
| 1993 | Performance Loss Due to Electrical Breakdown of Pre-Accelerator Gas | Jerald V. Parker |
| 1993 | Power Semiconductors Empirical Diagrams Expressing Life as a Function of Temperature Excursion | Istvan L. Somos |
| 1993 | Preliminary Design of a 1 Gigajoule Homopolar Generator | G. R. Headifen |
| 1993 | Propulsion powered electric Guns-a Comparison of Power System Architectures | Guy F. Grater |
| 1993 | Pulse Power Applications of Silicon Diodes in EML Capacitive Pulsers | Rolf Dethlefsen |
| 1993 | Railgun with Integrated Electrothermal Preacceleration | Holger G. Wisken |
| 1993 | Residual Plasma Property Control for Hypervelocity Railgun Performance | David P. Bauer |
| 1993 | Royal Ordnance Electrothermal Gun System Model (ROSETTE): an Update | Paul M Locking |
| 1993 | Salvo Fire Experiments Using a 0.60 Caliber Electromagnetic Launcher | R. L. Fuller |
| 1993 | Short Pulse, Peak Current Ratings of Diodes | Brian L. Maas |
| 1993 | Small-Bore Hypervelocity Electromagnetic Launcher Research Facility | T. W. Hurn |
| 1993 | Solid Armature Coaxial Railgun Experiment Results | James C. Schaaf Jr |
| 1993 | Solid Armature Performance with Resistive Rails | Yuri A. Dreizin |
| 1993 | Solid-Armature Railguns Without the Velocity-Skin Effect | M. Cowan |
| 1993 | Some Aspects of Future Military Requirements | F. Jamet |
| 1993 | Some Remarks on the Current Filament Modeling of Electromagnetic Launchers | B. Azzerboni |
| 1993 | Space Applications for Contactless Coilguns | R. J. Lipinski |
| 1993 | Spectroscopic Diagnostics of Railgun Plasma Armatures | Vivek Bakshi |
| 1993 | Stable and Reproducible Production of High Velocity Projectile in ISAS Railgun (HYPAC) | Nobuki Kawashima |
| 1993 | Status Report on Project Hercules | D. Loree |
| 1993 | Studies of Confined High-Pressure Discharges in an Electrothermal Capillary | David A. Benson |
| 1993 | Study of a New Railgun Configuration with Perforated Sidewalls | J. Zhang |
| 1993 | Study of High Current Commutation by Explosive Switch | S.Usuba |
| 1993 | Synergism in Research and Development Between Electromagnetic Guns and Spacecraft Electric Propulsion | Miles R. Palmer |
| 1993 | Technical Tradeoffs for Downsizing ETC Power Systems | W. J. Sarjeant |
| 1993 | The Analysis and Modeling of the ARDEC 2.5 km/s 20-mm Plasma Railgun Shot | D. A. Sink |
| 1993 | The Effect of the External Pressure on the Internal Conditions Inside the Discharge Tube | J. Ashkenazy |
| 1993 | The Kirkcudbright Electromagnetic Launch Facility | H. G. Hammon |
| 1993 | The LRT/TUM small caliber Electrothermal Accelerator | M. Rott |
| 1993 | The Magnet-Motor Energy Supply System for EML Together with a New Coil-Accelerator Concept | P. Ehrhart |
| 1993 | The Projectile-Wall Interface in Rail Launchers | Y. C. Thio |
| 1993 | The UK Military Perception of Electromagnetic Technology | Colonel Derek O'Callaghan |
| 1993 | The Use of Thyristors as Main Switches in EML Applications | Emil Spahn |
| 1993 | Theoretical Analysis of a Collapsing Field Accelerator | Samuel K. Ingram |
| 1993 | Theoretical Investigation of the Plasmadynamic Accelerator | P. Thomas |
| 1993 | Three Dimensional Forces and Energy Computation Software Package 'FEMAN' and its Applications | B. Azzerboni |
| 1993 | Three-Dimensional Thermal and Electromagnetic Coupled Analysis of Railguns | B. Azzerboni |
| 1993 | Time Dependent Simulation of the Plasma Discharge in an Electrothermal Launcher | R. B. Mohanti |
| 1993 | US Army Activities in Multidimensional Modeling of Electrothermal-Chemical Guns | G. P Wren |
| 1993 | Velocity Effects on Metal Armature Contact Transition (Railguns) | John P. Barber |
| 1993 | Velocity Limiting Magnetohydrodynamic Effects in Railgun Plasma Armatures | Roger Crawford |
| 1993 | Visible Light Emission Measurements From a Dense Electrothermal Launcher Plasma | O. E. Hankins |
| 1993 | X-Ray Diagnostics for the Single Shot Laboratory Gun | T. J. Hotz |
| 1993 | Zero-Ablation Tests on the HART Augmented Launcher | F. Stefani |
| 1995 | 3-D Plasma Armature Railgun Simulations | Dmitri Kondrashov |
| 1995 | A Busgun Design Example | Yuri A. Dreizin |
| 1995 | A Comparison of the Wear Behaviors of Six Elemental Wire Conductors | Chadee Persad |
| 1995 | A Field Study of a Hypervelocity Solid Propellant Electrothermal 105 mm Launcher | Zvi Kaplan |
| 1995 | A Global Theoretical Approach for the Electrothermal Gun- Scaling Laws and a 0-D Time-Dependent Mode | E. Jacob |
| 1995 | A Lagrangian Formulation for Mechanically, Thermally Coupled Electromagnetic Diffusive Processes With Moving Conductors | Kuo-Ta Hsieh |
| 1995 | A Maintainable Large Bore, High Performance Railgun Barrel | Duane C. Newman |
| 1995 | A Methodology for Computing Thermodynamic and Transport Properties of Plasma Mixtures in ETC Injectors | Jad Batteh |
| 1995 | A Novel Equivalent Electric Network Approach for the 3-D MHD Modelling of EML Plasma Armatures | N. Esposito |
| 1995 | A Novel Railgun Launcher Design | David P. Bauer |
| 1995 | A Resonant Series Counterpulse Technique for High Current Opening Switches | Edwin van Dijk |
| 1995 | A Solution for the Three Dimensional Rail Gun Current Distribution and Electromagnetic Fields of a Rail Launcher | Ira Kohlber |
| 1995 | A Study of the Operating Conditions of the Light-Gas Electric Generator's Discharge Chamber | A. V. Budin |
| 1995 | A System effectiveness Comparison Between Hypervelocity EM Armament and Conventional Armament in the Anti Armor Mission | Steven J. Schneider |
| 1995 | Acceleration of Powder Materials in an Electrothermal Launcher | E. Ya. Shcolnikov |
| 1995 | Acceleration of Solid Hydrogen Pellet Using Augmented Railgun for Magnetic Fusion Reactor Refueling | J. Zhang |
| 1995 | Achieving High Efficiency with Conventional Railgun Launchers | David P. Bauer |
| 1995 | Advanced Composite Flywheel Structural Design for a Pulsed Disk Alternator | D. H. Curtis |
| 1995 | Analyses of Molecular and Neutral Atomic Emission Spectra from an Electrothermal Launcher Plasma | Orlando E. Hankins |
| 1995 | Analysis of Components in Advanced Capacitive Pulse Forming Networks for Electric Guns | Warren J. Dick |
| 1995 | Analysis of Rotational Forces in Round Bore Railguns | Antonios Shallita |
| 1995 | Analytical Results for the Resistive Rayleigh-Taylor Instability in Rail Launcher Accelerated Plasma | M. A. Huerta |
| 1995 | Application of Coatings for Electromagnetic Gun Technology | Gregory R. Colombo |
| 1995 | Application of Programmable Discharge of Capacitive Energy Store for Current Pulse Forming in Railgun and Electrodischarge Launcher | P. Yu |
| 1995 | Armature Contact Load Dynamics | Edward A. Knoth |
| 1995 | Behavior of Multi-Tiered Copper Wire, Solid Armatures | Keith A. Jaminson |
| 1995 | Behaviors of Plasma Armature in the Augmented Railgun Using a Permanent Magnet | S. Katsuki |
| 1995 | Bore Lifetime Experiment | Heather L. Petresky |
| 1995 | Characteristics of High Efficiency 300 kJ Railgun | Akira Yamori |
| 1995 | Compact 50 kJ Pulse Forming Unit, Switched by Semiconductors | Emil Spahn |
| 1995 | Critical Current Density in Railguns with Composite Electrodes | Gennady A. Shvetsov |
| 1995 | Current and Heat Transport in the Solid-Armature Railgun | John D. Powell |
| 1995 | Current and Voltage Controlled Capacitor Charging Schemes | Ryan Elwell |
| 1995 | Current Maldistribution in Mid-Riding Integrated Launch Packages | Antonios Challita |
| 1995 | Current Wave and Magnetic Saw-Effect Phenomena in Solid Armatures | Trevor E. James |
| 1995 | DES 3 MJ-Railgun Experimental Results at ISL | J. Wey |
| 1995 | Design and Evaluation of Coils for a 50 mm Diameter Induction Coilgun Launcher | Ronald J. Kaye |
| 1995 | Design and Testing of a Rapid Fire, Lightweight, Ulltra Stiff Railgun for a Cannon Caliber Electromagnetic Launcher System | M. D. Werst |
| 1995 | Design and Testing of Integrated Metal Armature Sabots for Launch of Armour Penetrating Projectiles | J. H. Price |
| 1995 | Design Considerations for a Passive Magnetic Induction Signal Generator for Sensing Hypervelocity Projectile Passage | R. S. Hawke |
| 1995 | Design of an Electromagnetic Accelerator for Turbulent Hydrodynamic Mix Studies | Allan R. Susoeff |
| 1995 | Design of Pulsed Coil-Guns | S. Williamson |
| 1995 | Design Optimisation of Coilguns | G. Hainsworth |
| 1995 | Design Optimizations of a Small Caliber Electrothermal Accelerator | Martin Rott |
| 1995 | Discarding Armature and Barrel Optimization for a Cannon Caliber Electromagnetic Launcher System | J. H. Price |
| 1995 | DRA 500 kJ Multi-Module Capacitor Bank | B. Augsburgr |
| 1995 | Effective Launch Package Integration for Electromagnetic Guns | Timothy E. Hayden |
| 1995 | Electromagnetic (EM) Weapon System Integration into Combat Vehicles | Bradley D. Goodell |
| 1995 | Electromagnetic Aircraft Launch System-EMALS | Michael R. Doyle |
| 1995 | Electromagnetic and Structural Analyses of Electric Gun and Integrated Launch Package Systems | H. D. Yun |
| 1995 | Electromagnetic and Thermal Analysis of Muzzle-Fed Railguns | E. Cardelli |
| 1995 | Electromagnetic Field Measurements Near a Railgun | William O. Coburn |
| 1995 | ET-Guns with Working Media of Low Molecular Weight: a Numerical Study | D. Hensel |
| 1995 | Experimental Investigation of a Small Bore Plasma Armature Rail Launcher at High Current Densities | Bernhard Dirr |
| 1995 | Experimental Results and Performance Analysis of a 500 m/sec Linear Induction Launcher (LIL) | Z. Zabar |
| 1995 | Experimental Studies of the Plasma-Propellant Interface for Electrothermal-Chemical Launchers | C. M. Edwards |
| 1995 | Experimental Validation of a Capacitor Discharge Induction Launcher Model | K. Gregory |
| 1995 | Experiments on Simple Railgun with the Compacted Plasma Armature | E. M. Drobyshevski |
| 1995 | Experiments with the Green Farm Electric Gun Facility | Ian R. McNab |
| 1995 | Exploratory Metallurgical Evaluation of Worn Rails From a 90 mm Electromagnetic Railgun | Timothy Wolfe |
| 1995 | Fabrication and Testing of a 30 mm and 90 mm Laminated, High L' Railgun Designed and Built at CEM-UT | J. J. Hahne |
| 1995 | Firings of Tactically-Configured Air-Defense Projectiles from a 90 mm Electromagnetic Rail Gun | E. Scott Statton |
| 1995 | Full-Bore Simulation for Plasma-Driven Railguns | Wilford Smith |
| 1995 | High Accuracy Measurements on Railguns | J. Wey |
| 1995 | High Efficiency Electrothermal Accelerator | E. Y. Shcolnikov |
| 1995 | High Performance Electric Drivetrain Components | Pter P. Mongeau |
| 1995 | Implications of Rail Straightness for EM-Launched Projectiles | Larry Burton |
| 1995 | Improvement of Railgun Projectile Using Higher Specific Weight Material | Nobuki Kawashima |
| 1995 | In-bore Projectile Dynamics in the Linear Induction Launcher (LIL). 1. Oscillations | Ki-Bong Kim |
| 1995 | In-Bore Projectile Dynamics in the Linear Induction Launcher (LIL). Part II: Balloting, Spinning, and Nutation | Ki-Bong Kim |
| 1995 | Inductance Gradient Scaling Experiments in an Augmented Railgun | Dennis Keefer |
| 1995 | Inductive Acceleration of Moving Projectiles and Synchronization Between the Driving Field and the Projectile Motion | J. Nett |
| 1995 | Investigation of Dynamics and Structure of a Plasma Armature in the Railgun by Means of Rogowski Induction Coils | Vladislav P. Fomichev |
| 1995 | Materials Evaluation for use as Plasma Brush Electrodes with Hybrid Armatures | R. S. Hawke |
| 1995 | Measurement of Temperatures in Optically Thick Railgun Plasma Armatures | Vivek Bakshi |
| 1995 | Methods for Determining Burning or Gas Generation Rates of Plasma-Augmented Propellants with Applications to Electrothermal-Chemical (ETC) Guns | William F. Oberle |
| 1995 | MHD Generators as Pulse Power Sources for Arc-Driven Railguns | N. Esposito |
| 1995 | MHD-Aspects of EML Efficiency Increase due to Channel Segmentation | Savelii S. Katsnel'son |
| 1995 | Minimizing Non-Arcing Contact Material Deposition on Rails | Antonios Challita |
| 1995 | Model of Contact Transitioning with "Realistic" Armature-Rail Interface | John P. Barber |
| 1995 | Modelling of the Transient Diffusion of Current and Heat in Railguns Via an Equivalent Network | Ermanno Cardelli |
| 1995 | Multi-Point, Packed Wire, and Monolithic Armatures | R. A. Marshall |
| 1995 | Muzzle-Fed Railgun Experiments with 3-D Electromagnetic Simulations | Jaime Taylor |
| 1995 | Numerical Analysis Techniques Applied to a Model Iron-Cored Compulsator | J. F. Eastham |
| 1995 | Numerical Simulation and Experiment of Plasma Flow in the Electrothermal Launcher SIRENS | J. D. Hurley |
| 1995 | Numerical Simulation and Experimental Results of the Metal Armature Acceleration | Dmitri V. Khandryga |
| 1995 | Observation of Solid Armature Behavior | R. A. Marshall |
| 1995 | On the Application of Plasma Pulses Generated by Electromagnetic and Electrothermal Launchers for Surface Treatment | E. Igenbergs |
| 1995 | On the Origins of Muzzle Voltage | Yuri A. Dreizin |
| 1995 | Optimization and Critical Design Issues of the Air Core Compulsator for the Cannon Caliber Electromagnetic Launcher System (CCEML) | J. R. Kitzmiller |
| 1995 | Optimization of an Electrothermal Capillary | Richard J. Kennaugh |
| 1995 | Performance Characteristics of a High Velocity, 25 mm Railgun | Keith A. Jamison |
| 1995 | Performance of an Induction Coil Launcher | I. R. Shokair |
| 1995 | Performance of the 52 MJ power supply at the Electric Armaments Research Center | Duk I. Chang |
| 1995 | Performance Predictions for Electromagnetic Launching with Multi-Fibre Solid Brush Armatures and Resistively Layered Rail Accelerators | A. J. Schoolderman |
| 1995 | Physical Processes and Parametric Studies on an Electrothermal Launcher | L. Veron |
| 1995 | Plated Armature Contacts for Solid Armature Electromagnetic Railgun Launchers | P. D. Aalto |
| 1995 | Post-Test Characterization of the Hardness and Microstructure of Copper Rails From a 9 MJ Electromagnetic Launcher | Chadee Persad |
| 1995 | Power Electronics and Controls for Air Core Compulsator | D. J. Wehrlen |
| 1995 | Projectile Transverse Motion and Stability in Electromagnetic Induction Launchers | Isaac R. Shokair |
| 1995 | Pulsed Disk Alternators as Energy Storage Devices for Electrothermal Chemical Guns | R. L. Puterbaugh |
| 1995 | Railgun Armature Arcing Voltage Drop | Antonios Challita |
| 1995 | Railgun Electromagnetism | Hugh A. Calvin |
| 1995 | Railgun Instrumentation | T. J. Hotz |
| 1995 | Railgun Launch of Small Bodies | E. M. Drobyshevski |
| 1995 | Railgun Performance Enhancement From Distribution of Energy Feeds | Matthew J. Matyac |
| 1995 | Range and Railgun Development Results at LS&PA "SOYUZ" | Yuri P. Babakov |
| 1995 | Resistive Contact Region Solid Armatures: Electro-Thermal Design Optimisation | Trevor E. James |
| 1995 | Review of Component Erosion in Electric Launcher Technology | Mohamed A. Bourham |
| 1995 | Review of the Mechanisms of Electrode and Insulator Erosion and Degradation in High Current Arc Envinments | T. G. Engel |
| 1995 | Royal Ordnance 2.4 MJ Multi-Module Capacitor Bank | B. Augsburger |
| 1995 | Secondary Arcs in 2-D MHD numerical simulations of EML Plasma Armatures | G. C. Boynton |
| 1995 | Simulation of the Plasma-Surface Interaction in Electric Launchers | N. P. Orton |
| 1995 | Small Bore Railgun Activities at KSL | S. Ikeda |
| 1995 | Solid Armature Development Program at the ARDEC Electric Armaments Research Center | D. J. Hildenbrand |
| 1995 | Solid Ring Armature Experiments in a Transaugmented Railgun | Roger Crawford |
| 1995 | Some Remarks Concerning the Optimization of a Railgun System | P. Lehmann |
| 1995 | Spatial Effects of an Electrically Generated Plasma on the Interior Ballistics of Electrothermal-Chemical (ETC) Guns | G. P. Wren |
| 1995 | SPEAR Coilgun | D. A. Bresie |
| 1995 | Static and Quasi-Static Models for the Magnetic Field of a Railgun | William O.Coburn |
| 1995 | Status of the 9 MJ Range Gun System | J. D. Herbst |
| 1995 | Strength of Aluminum Under Pulsed Heating Conditions | Antonios Challita |
| 1995 | Structural Response of a Railgun Accelerator | G. A. Shvetsov |
| 1995 | Tactical Applications for Electromagnetic Launchers | James J. Scanlon III |
| 1995 | Technical Aspects of Railguns | Hilmar Pter |
| 1995 | Temporally Resolved Visible and UV Spectroscopy of Exploding Wires | C. Christou |
| 1995 | Testing of an Air-Core Compulsator Driven 0.60 Caliber Railgun System | R. L. Fuller |
| 1995 | The D2 Hypervelocity Projectile Program | Patrick Dewar |
| 1995 | The Determination of Launch Induced Static and Dynamic Rail Deflection of a Benet 50 mm Railgun Barrel | John R. Rapka |
| 1995 | The Development and Testing of a 60 mm Electrothermal-Chemical Gun Technology Demonstrator | M. Bradley |
| 1995 | The Effect of Serrated Bore Surfaces on plasma Armatures | Brian L. Maas |
| 1995 | The Electromagnetic Chemical Propulsion Concept | Yuri A. Dreizin |
| 1995 | The ET-Launcher Operation with Mass Supply and Distributed Heat Sources | Alexander V. Zagorskii |
| 1995 | The Pulse Shape Requirements of an ETC Gun | C. C. H. Guyott |
| 1995 | The Use of Conducting Shields for Increasing the Operating Current Limit in a Rail Launcher | E. M. Brobyshevski |
| 1995 | The Use of Coupled EM-Hydro Finite Element Techniques for the Design of Railguns | R. Critchley |
| 1995 | Thermal Loading and Heat Removal From a Sequentially Fired Railgun | Keith A. Jamison |
| 1995 | Transition Between Two Sections in a Linear Induction Launcher (LIL) | X. N. Lu |
| 1995 | Transition Conditions for Solid Armatures in Railguns with Muzzle Current Feed | Yu. A. Kareev |
| 1995 | Two-Dimensional Magnetohydrodynamics Code Simulating LRT's Plasma Dynamic Accelerator | Peter Thomas |
| 1997 | 3-D MHD Simulation of a Railgun Hybrid Armature | Dmitri Kondrashov |
| 1997 | 3-D Numerical Simulation of Plasma Armature Railguns | Nunzio Esposito |
| 1997 | 3D Modeling of Sliding Electrical Contact | K. T. Hsieh |
| 1997 | A Diagnostic Technique for Understanding Startup of Metal Armatures | Edward A. Knoth |
| 1997 | A High Performance Railgun Launcher Design | John M. Juston |
| 1997 | A Lightweight Composite Shielding Material for Electromagnetic Gun Launchers | Warren Williams |
| 1997 | A Maxwell's Equation Solver for 3-D MHD Calculations | Dmitri Kondrashov |
| 1997 | A Modular 300-kJ Capacitive Pulsed Power Supply System for the Swedish ETC Programme | M. J. Loffler |
| 1997 | A Study of Operating Modes for Compulsator Based EM Launcher Systems | S. B. Pratap |
| 1997 | A Theoretical and Experimental Study of the Electromagnetic Environment Surrounding a Magnetic Induction Launcher | Paul R. Berning |
| 1997 | An All-Electric Vehicle Technology Demonstrator with a 35-mm Electrothermal Gun System | M. J. Loffler |
| 1997 | An Analysis of Ballistic Parameters/Mechanisms Affecting Efficiency in Electrothermal-Chemical (ETC) | William F. Oberle |
| 1997 | An Update on the UK Electric Gun Research Programme | David Haugh |
| 1997 | Analysis Of Generator-driven Linear Induction Launchers | M. Liao |
| 1997 | Analysis of Launch Induced Motion of a Hybrid Electromagnetic/Gas Gun | E. Kathe |
| 1997 | Analysis of Solid Propellant Combustion Behavior Under Electrothermal Plasma Injection for ETC Launchers | Mohamed A. Bourham |
| 1997 | Arcing Phenomena in Transitioned Solid Armatures | Trevor E. James |
| 1997 | Cannon-Caliber Electromagnetic Launcher | Alexander E. Zielinski |
| 1997 | Characterization of Hypervelocity Gouge Craters in Rail Conductors | Chadee Persad |
| 1997 | Combustion Control Requirements in High Loading Density, Solid Propellant ETC Gun Firings | Kevin J. White |
| 1997 | Combustion Driven Pulsed Linear Generators for Electric Gun Applications | Peter Mongeau |
| 1997 | Comparison of Switching Technologies for a Tactical EML Application | H. Singh |
| 1997 | Compulsator Rotordynamics and Suspension Design | B. T. Murphy |
| 1997 | Computer Modeling and Prediction of Solid Armature Contact Wear and Transitioning in Electromagnetic Guns | Dennis J. Hildenbrand |
| 1997 | Conservation of Momentum and Recoil in the Railgun | David R. Sadehin |
| 1997 | Consideration of Pressure Gradients in Electrothermal-Chemical (ETC) Guns | Gloria P. Wren |
| 1997 | Current Carrying Capacity of Solid Armatures for Railguns at Zero Speed | Richard A. Marshall |
| 1997 | Demonstration of a Modular, Repetitive-Fired 1/4-MJ PFN for ETC Guns | D. Bhasavanich |
| 1997 | Design and Evaluation of Carbon Fibre-Reinforced Launch Packages with Segmented, Copper and Molybdenum Fibre Armatures | Marcel Koops |
| 1997 | Design and Operation of the Electrogun, an Electrothermal Gun for Producing Metal and Carbon Plasma | Dennis R. Peterson |
| 1997 | Design and Testing of an Ultra Distributed Energy Store System (UDESS) | Timothy J. Scholz |
| 1997 | Design and Testing of tlhe Power Electronics for the Cannon Caliber Electromagnetic Gun System | C. E. Penney |
| 1997 | Development and Implementation of a Rail Current Optimization Program | T. L. King |
| 1997 | Discharge of the Plasma Generator in Electrothermal-ChemicaI Launchers | Song Shengyi |
| 1997 | Dynamic Models of 3-Phase Alternators Including Saliency Effects using PSpice for Windows | Michael Giessemann |
| 1997 | Early Phenomena of Capillary Discharges in Different Ambient Pressures | T. Sueda |
| 1997 | Electrical Performance of a Round Bore, Augmented, Quadrupole Railgun | Keith A. Jamison |
| 1997 | Electromagnetic Launch: A Review of the U.S. National Program | Harry D. Fair |
| 1997 | Electromagnetic Processes and Launch Efficiency of Railgun Systems | Oleg V. Fat'yanov |
| 1997 | Electrothermal Gun Research in Europe Summary of Major Activities and Results Obtained from German and Franco-German R&D Programmes | Th. H. G. G. Weise |
| 1997 | Energy Storage Capacitors- Aging, and Diagnostic Approaches for Life Validation | W. J. Sargeant |
| 1997 | Erosion of Explosively Compacted Mo/Cu Electrodes in High-Current Arc Discharges | G. A. Shvetsov |
| 1997 | Evaluation of Railgm Inductance by 2-D Transient FE Analysis | K. Moyama |
| 1997 | Finite Element Modelling of Flux Concentrators for Coilguns | G. Hainsworth |
| 1997 | Generation of HyperveIocity Plasma Pulses Using an Electrothermal Accelerator | Martin Rott |
| 1997 | High Performance `Projectile Seal Development for Non Perfect Railgun Bores | T. R. Wolfe |
| 1997 | High Temperature Superconductor Resistive Switch | Timothy J. Scholz |
| 1997 | Homopolar Generators for Electric Guns | Ian R. McNab |
| 1997 | Hypervelocity Electric Discharge Accelerator | V. A. Kolikov |
| 1997 | In-Bore Stiffness Considerations for Electromagnetic Projectile Armatures and Boreriders | Lawrence W. Burton |
| 1997 | Installation and Commissioning of the 9 MJ Range Gun System 90 mm High L' Laminated Railgun | J. D. Herbst |
| 1997 | Integrated Launch Package Performance in the Cannon-Caliber Launcher | Alexander E. Zielinski |
| 1997 | International Railgun Modeling Effort | K. T. Hsieh |
| 1997 | Investigation of Discharge in a Railgun by Means of Rogowski Coils | Vladislav P. Fomichev |
| 1997 | Investigation of Techniques to Increase Armature Transition Velocity | I. S. Glushkov |
| 1997 | Investigations of Electromagnetic Acceleration and Related Energy Sources in Ukraine | Volodymyr T. Chemerys |
| 1997 | Laboratory Testing of the Pulse Power System for the Cannon Caliber Electromagnetic Gun System (CCEMG) | J. R. Kitzmiller |
| 1997 | Large Calibre Armature Firings at Green Farm Electric Gun Test Facility | David Haugh |
| 1997 | Launch Package Mass and Pulsed Power Energy Estimation for Subcaliber Electromagnetic Railgun Projectiles | Scott Fish |
| 1997 | Launching Tactically Configured Solid Armature Projectiles from Large and Medium Calibre Railguns - Results from the DRA Test Programme | Doug Kirkpatrick |
| 1997 | Liquation Cracking And Its Effects In Aluminum Alloy Armatures | A. Yeoh |
| 1997 | Macroparticle Launch Velocity Control in Rail Accelerators | Ilya B. Azanov |
| 1997 | Measurement of the Muzzle Dynamic Pressure of the Plasma Dynamic Accelerator | Peter Thomas |
| 1997 | Metallurgical Analysis of an Aluminum Sabot Fired in the Cannon Caliber Electromagnetic Gun (CCEMG) | Stacey Clark Kerwien |
| 1997 | Metallurgical Post-Mortem Analysis of the Cannon Caliber Electromagnetic Gun- Rails and Insulating | Stacey Clark Kerwien |
| 1997 | Modeling of the Electrothermal Igniter Metal Vapor Plasma for Electrothermal-Chemical Guns | Laxminarayan L. Raja |
| 1997 | Muzzle Arc Control Using an Inductive Shunt | J. V. Parker |
| 1997 | Numerical Comparison Between a Differential and an Integral Approach in MHD Simulations of Electromagnetic Railgun Plasma Armatures | Ermanno Cardelli |
| 1997 | Numerical Investigation of an Ablation-Dominated Plasma Armature | Bernhard Dirr |
| 1997 | Numerical Simulation of the Compressor Coil of the Plasma Dynamic Accelerator | Peter Thomas |
| 1997 | Numerical Techniques in Electromagnetic Compatibility-Oriented Design of Rail Launchers Operating with Plasma Armatures | Marco Angeli |
| 1997 | Observation and Simulation of Armature Contact Performance in the Cannon-Caliber Electromagnetic Gun | Alexander Zielinski |
| 1997 | Observations of Visible Light Emission from Interactions between an Electrothermal Plasma and a Propellant | Orlando E. Hankins |
| 1997 | On the Feasibility of Mounting an Electrothermal Chemical Gun System on a Combat Vehicle | T. Podlesak |
| 1997 | On the Nature of the Armature-Rail Interface: Liquid Metal Effects | Chadee Persad |
| 1997 | One Kind of Scaling Relations on Electromechanical Systems | K. T. Hsieh |
| 1997 | Optimal Energy and Mass Input into an Electro-Thermal Launcher | Alexander V. Zagorskii |
| 1997 | Optimum Contact Region Geometry of Solid Armatures | Trevor E. James |
| 1997 | Overview of Some Recent EML Efforts Within Russia | Gennad A. Shvetsov |
| 1997 | Plasma-Fluid Interaction and Arc Resistance in Electrothermal Launchers | K. Daree |
| 1997 | Preoptimtiation of Large Calibre Plasmaburners With a Full Scale Experimental Simulator | Th. H.G.G. Weiss |
| 1997 | Prime Power and Pulsed Energy Storage for EM Gun Equipped Tank Combat Missions | Scott Fish |
| 1997 | Pulse Forming Network Optimal Design for the Power Supply of EML Launchers | Antonino Musolino |
| 1997 | Pulsed Coilgun Limits | Stephen Williamson |
| 1997 | Pulsed Power for Electric Guns | Ian R. McNab |
| 1997 | Pulsed Rotating Machine Power Supplies for Electro-Thermal-Chemical Guns | W. A. Walls |
| 1997 | Pulsed-Power and High Energy Piasma Simulations for Application to Electrothermal-Chemical Guns | Gary L. Katulka |
| 1997 | Railgun Modeling with the P-Spice Code | J. Wey |
| 1997 | Railgun Solid Armature Scaling Model | R. C. Zowarka |
| 1997 | Rapid Testing For Multishot Railgun Bore Life | David P. Bauer |
| 1997 | Recent Advances in Electrothermal-Chemical Gun Propulsion at United Defense, L.P. | A. Chaboki |
| 1997 | Setup and Performance of a 105mm Electrothermal Gun | Th. H.G.G. Weise |
| 1997 | Silicon Carbide Thyristors for Electric Guns | Terence Burke |
| 1997 | Solid Armature Performance: a Progress Review 1980-1990 | Chadee Persad |
| 1997 | Solid State Switches for Electric Gun Applications | T. F. Podlesak |
| 1997 | Spatial Effects in a Railgun Plasma Armature | Savelii S. Katsnel'son |
| 1997 | Spectroscopic Measurements of Railgun Plasma Armatures in an Augmented Railgun Using a Permanent Magnet | S. Katsuki |
| 1997 | Study of a Transaugmented Two-Stage Small Circular-Bore Railgun for Injection of Hypervelocity Hydrogen Pellets as a Fusion Reactor Refueling Mechanism | M. W. Tomkins |
| 1997 | Study of New Materials for Railgun Launchers | A. Poltanov |
| 1997 | Summary of HEDRC-IVTAN Railgun Investigations | V. E. Ostashev |
| 1997 | Summary of the Hypervelocity Weapon System Field Experiment | Timmy C. Aden |
| 1997 | Superconducting Inductive Pulsed Power Supply for Electromagnetic Launchers- Design Aspects and Experimental Investigation of Laboratory Set-Up | W. Weck |
| 1997 | Testing of the Cannon Caliber Rapid Fire Railgun | M. D. Werst |
| 1997 | The AMT Maglev Test Sled - EML Weapons Transition to Transportation | James C. Schaaf Jr. |
| 1997 | The Current Melt-Wave Model | Leslie C. Woods |
| 1997 | The Distributed Energy Store Railgun, its Efficiency, and its Energy Store Implications | Richard A. Marshall |
| 1997 | The First Generation in the Development and Testing of Full-Scale, Electric Gun-Launched, Hypervelocity | D. J. Elder |
| 1997 | The IAT Electromagnetic Launch Research Facility | J. V. Parker |
| 1997 | The Magnetic Levitation of the Projectile in Coilguns | De-man Wang |
| 1997 | The Railgun Experiments on Head-On Collision of Different Mass Bodies in 10-15 kms Range | E. DRobyshevski |
| 1997 | The Study of Sliding Contact in Railgun with Metal Armature | A. K. Kondratenko |
| 1997 | The Theoretical Analysis of a Magnetic Flux Generator | G. G. Kapustjanenko |
| 1997 | The Use of Currents induced within a Conducting Shield for Railgun Performance Control | M. P. Galanin |
| 1997 | Ultimate Kinematic Characteristics of Armatures with Orthotropic and Anisotropic Electroconductivity | G. A. Shvetsov |
| 1997 | Use of Electromagnetic Coil Launcher to Increase Muzzle Velocity of Conventional Cannons | P. M. Vottis |
| 1997 | Velocity Skin-Effect Transition Conditions on Metal-on-Metal Sliding Contacts in Muzzle-Fed Railguns | Marco Angeli |
| 1997 | Viscoelastic Behavior of Composite Rotors at Elevated Temperatures | Jerome T. Tzeng |
| 1999 | 3-D Field Analysis In Tubular Induction Launchers With Armature Transverse Motion | A. Musolino |
| 1999 | A 540 kJ Modular Capacitive Pulsed Power Supply System for Basic Investigation on ETC-Performance | H. G. Wisken |
| 1999 | A Coilgun-Based Plate Launch System | Paul R. Berning |
| 1999 | A Compact Pulse Forming Network, Based on Semiconducting Switches, for Electric Gun Applications | E. Spahn |
| 1999 | A High-Capacity Triggered Vacuum Switch with Single Axial Magnetic Field Electrode | Je Junjia |
| 1999 | A Three-dimensional Finite Element Model For Thermal Effect Of Imperfect Electric Contacts | Bok-ki Kim |
| 1999 | Ablation Measurements on EML Insulators Using Free-Arcsq | K. B. Nornoo |
| 1999 | Anallysis of the Combustion Driven Linear Generator for Electric Gun Applications | J. Li |
| 1999 | Analysis of High-Temperature Materials for Application to Electric Weapon Technology | Gary L. Katulka |
| 1999 | Analysis Of Startup Behavior In a "C-Shaped" Armature Using Linked EMAP3D/DYNA3D Finite Element Code | David A. Hopkins |
| 1999 | Application of Electromagnetic Guns to Future Naval Platforms | W. A. Walls |
| 1999 | Calculating The Liquid Film Effect On Solid Armature Rail-Gun Launching | E. M. Robyshevski |
| 1999 | Characterization of Triggered Vacuum Switches for High Current Operation | J.A. Pappas |
| 1999 | Compensation in Pulsed Alternators | S. B. Pratap |
| 1999 | Continued Testing of the Cannon Caliber Electromagnetic Gun System (CCEMG) | M. D. Werst |
| 1999 | Current Distribution and Resistance Characteristics in Plasma Injectors for Electrothermal-Chemical Launch | John D. Powell |
| 1999 | Demonstration of a Superconducting Inductive Pulsed Power Supply at Simulated Load Conditions | Werner Weck |
| 1999 | Design and Development of a Novel Flux Compression Generator for Landmine Detection Applications | Thomas G. Engel |
| 1999 | Development of a Flux Compression Power Unit for Millisecond ETC Pulsed Power Applications | Edward B. Goldman |
| 1999 | Early Electric Gun Research | Ian R. McNab |
| 1999 | Effect Of Railgun Electrodynamics On Armature Discard | Alexander E. Zielinski |
| 1999 | Effect of Railgun Electrodynamics on Projectile Launch Dynamics | Alexander E. Zielinski |
| 1999 | Effect of Rail/Armature Geometry on Current Density Distribution and Inductance Gradient | Bok-ki Kim |
| 1999 | Efficiency, Performance Limits and Scaling of Rail Launchers | Trevor E. James |
| 1999 | Electric Energy Gun Technology: Status of the French-German-Netlierlands Programme | William J. Kolkert |
| 1999 | Electric Launch in Russia, A Review of Recent Results | Gennady A. Shvetsov |
| 1999 | Electrical and Thermal Effects of Rail Cladding | Scott Levinson |
| 1999 | Electro-Thermal Behavior of Solid Armatures | Marco Angeli |
| 1999 | Electromagnetic And Structural Analyses Of An Integrated Launch Package | H. P. Liu |
| 1999 | Electromagnetic Powder Deposition Experiments | R. C. Zowarka |
| 1999 | EM Gun Scaling Relationships | Heedo D. Yun |
| 1999 | Emission Spectroscopic Measurements and Analysis of a Pulsed Plasma Jet | James M. Kohel |
| 1999 | EML Technology Research In China | Ying Wang |
| 1999 | Energy Distribution and Radiative Heat Loss in Electrothermal-Chemical (ETC) Closed Chambers | William Oberle |
| 1999 | Energy Storage Capabilities of Rotating Machines Including a Comparison of Laminated Disk and Rim Rotor Composite Designs | Robert Acebal |
| 1999 | ETC Technology Development at Soreq NRC, Israel | D. Melnik |
| 1999 | Experimental Characterization of Plasma Effects on Energetic Materials for Electrothermal-Chemical Launch Applications | Gary L. Katulka |
| 1999 | Experimental Observation of the Rail Resistance Contribution to Muzzle Voltage | Jerald V. Parker |
| 1999 | Experiments to Measure Gouging Threshold Velocity for Various Metals Against Copper | Francis Stefani |
| 1999 | Experiments To Measure Wear In Aluminum Armatures | F. Stefani |
| 1999 | First Measurements Of Current Distribution In Moving Fiber-Armatures In Railguns | J. Wey |
| 1999 | Flow Dynamics and Microparticles Acceleration in the Electrothermal Launcher | E. Ya. Shcolnikov |
| 1999 | High Strain Insulation Systems for Conipulsator Rotors | J. J. Hahne |
| 1999 | High-Current Vacuum Switching Devices for Power Energy Storages | Dmitrii F. Alferov |
| 1999 | Implementing Tri-Potential Approach In EMAP3D | Kuo-Ta Hsieh |
| 1999 | Improved Integrated Launch Package Ballistic Performance | Alexander E. Zielinski |
| 1999 | In-Bore Electric and Magnetic Field Environment | Alexander E. Zielinski |
| 1999 | In-Bore Measurements Using An Optical Data Link | Kurt A. Schroeder |
| 1999 | Influence of Combat Vehicle System Constraints on EML Technology Development | Robert J. Taylor |
| 1999 | Influence of Radiation on Grain Heating in ETC Closed Chambers | Gloria P. Wren |
| 1999 | Influence of the Armature-Rail Geometry on Results of Launch Experiments of Fibre Armatures with Railguns | W. Karthaus |
| 1999 | Integrated Thermal Management of a Hybrid Electric Vehicle | Richard M. Traci |
| 1999 | Investigations On Magnetic Field In The Interface Regions Between Plasma Armature And Rail Electrode | Zou Jiyan |
| 1999 | Laminated Low Cost Rails and Armatures for Rail Launchers | Richard A. Marshall |
| 1999 | Launch Package For Multiple-Rod Hypervelocity Impact Investigation | A. F. Savvateev |
| 1999 | Loss of Propulsive Force in Railguns with Laminated Containment | Jerald V. Parker |
| 1999 | Metal Bodies Transition Velocity in Railguns with Traditional and Muzzle Current Supply | Yu. A. Kareev |
| 1999 | Modeling of Multiple Liner Containment Systems for High Speed Rotors | K. A. Dulaney |
| 1999 | Multipulse Discharge in the Chamber of Electric Discharge Launcher | A. V. Budin |
| 1999 | Observation And Simulation Of Solid-Armature Railgun Performance | John D. Powell |
| 1999 | On The Design Of A Coilgun As A Rapid-Fire Grenade Launcher | M. Liao |
| 1999 | Overview of ETC Program in Korea | Jae Won Jung |
| 1999 | Performance Simiulatioin of Pulsed Power Supply System for Electrothermal Launcher | Kostyantyn V. Dubovenko |
| 1999 | Plasma Propagation and Ignition of Propellant in the Chamber of a SPETC Gun | Lior Perelmutter |
| 1999 | Preliminary Experimental Results of a Novel Induction Type Railgun | Akira Yamori |
| 1999 | Progress in Materials for EML: Review and Preview | Chadee Persad |
| 1999 | Rail Heating Analysis for Multishot EM Gun Operation | S. Fish |
| 1999 | Railgun Bore Geometry, Round Or Square? | Richard A. Marshall |
| 1999 | Railgun Electric Fields: Theory and Experiment | Alexander E. Zielinski |
| 1999 | Recent Muzzle-Fed Railgun Experiment on Metal Armature for Arcless Acceleration | A. P. Lotosky |
| 1999 | Results From Initial ETC Closed Vessel Experiments | Sten Andreasson |
| 1999 | Secondary Arc Dynamics in a Railgun Bore | Akira Yamori |
| 1999 | Simulation of Plasma Radiation in Electrothermal-Chemical Accelerators | Klaus Kappen |
| 1999 | Simulation of Railgun Gouging | David L. Bourell |
| 1999 | Single Shot Switch Performance on the Cannon Caliber Electromagnetic Gun Program | T. J. Hotz |
| 1999 | Subscale Rotor Spin Testing for Compulsator Component Development | K. G. Cook |
| 1999 | The Design And Structural Analysis Of A Coilgun For Low Acceleration Of Heavy Loads | De-Man Wang |
| 1999 | The Design, Fabrication and Characterization of an Advanced Graphite Composite Structure for High Speed Rotating Machines | Stuart Rosenwasser |
| 1999 | The Effect Of External Pressure On The Plasma Parameters In Ablative Capillary Discharges | R. Alimi |
| 1999 | The Effects of Projectile Injection on Rail Ablation in Arc-Driven Railguns | Zhou Zhikui |
| 1999 | The Evaluation and Testing of Graphite Fiber Composite Materials for High Speed Rotors | Geza Nagy |
| 1999 | The Interaction of Electrothermally Supplied Energy with Compact Solid Propellants | A. M. Voronov |
| 1999 | The Science and Technology of Electric Launch: A U.S. Perspective | Harry D. Fair |
| 1999 | The STAR Railgun Concept | Ian R. McNab |
| 1999 | The Test And Analysis Of A 3 - Stage Reconnection Coil Gun | Shun-Shou Gao |
| 1999 | The UK Electric Gun Programme in 1998 | D. C. Haugh |
| 1999 | Theoretical Analysis of an External Pulsed: Plasma Jetq | Dennis E. Wilson |
| 1999 | Thermal And Mechanical Stress In Induction Coilguns | G. Becherini |
| 1999 | Thermodynamic Assessment of a Nitro-Organic Plasma with an Experimental Design Method | Luc Brunet |
| 2001 | A Coaxial Railgun as a Prototype of a New Generation Railgun | Yu. A. Kareev |
| 2001 | A Comparison of Formulations for 3D Finite Element Modeling of Electromagnetic Launchers | D. Rodger |
| 2001 | A Mathematical Model of the Reusable Linear Magnetic Flux Compressor | Ying Wang |
| 2001 | A Moving Boundary Diffusion Model for PIN Diodes | Hanzhong Zhang |
| 2001 | A Novel Railgun Launch Package Concept | Andrew P. Noel |
| 2001 | A Review of U.S. Patents in Electromagnetic Launch Technology | Chadee Persad |
| 2001 | A Thermal Hydraulic Model of Melt-Lubrication in Railgun Armatures | R. E. Kothmann |
| 2001 | A Transitioning Hybrid Armature Concept | Trevor E. James |
| 2001 | Acceleration of Microparticles in Electrothermal Launcher with Multigap Scheme of Discharge Unit | E. Ya. Shcolnikov |
| 2001 | Account of Interior Ballistic Parameters of the Launch by Slurry/Liquid Propellant with ETC-Ignition | Vladimir V. Zharovtzev |
| 2001 | Active Armor Protection-Conception and Design of Steerable L:auncher Systems Fed by Modular Pulsed-Power Supply Units | Klaus Sterzalmeier |
| 2001 | Active Magnetic Bearings for Energy Storage Systems for Combat Vehicles | M. A. Pichot |
| 2001 | Adapting EMAP3D to Parallel Processing | V. Thiagarajan |
| 2001 | Advanced Semiconductor Switches for EM Launchers | Hardev Singh |
| 2001 | An Investigation of the Effects of Some Properties of Materials on the Characteristics of Armature Acceleration in a Railgun | M. P. Galanin |
| 2001 | Analysis of Burning Rate Phenomena and Extinguished Solid Propellants from an Interrupted Closed Bomb with Plasma Igniter | P. Kaste |
| 2001 | Analysis of the Performance of a Multi-Stage Pulsed Linear Induction Launcher | Sami Barmada |
| 2001 | Brush/Slip Ring Current Collector Performance and Anomalies During Compulsator Commissioning | Jonathan J. Hahne |
| 2001 | Calculation of Plasma Radiation Transport for Description of Propellant Ignition and Simulation of in ETC Guns | Klaus Kappen |
| 2001 | Characterization of Silicon Carbide and Commercial-Off-The-Shelf (COTS) Components for High-g Launch | Gary L. Katulka |
| 2001 | Compact Modular Power Supplies for Superconducting Inductive Storage and for Capacitor Charging | J. Biebach |
| 2001 | Comparison of a Single Pulsed Alternator with Two or More in Parallel for Driving a Railgun | Don Eccleshall |
| 2001 | Contact Pressure Distribution and Transition in Solid Armatures | Trevor E. James |
| 2001 | Current Distribution and Plasma Properties in Injectors for Electrothermal-Chemical Launch | John D. Powell |
| 2001 | Demonstration of a Hypervelocity Mass-Efficient Integrated Launch Package | Alexander E. Zielinski |
| 2001 | Design and Performance of a 300 kJ Pulsed Power Module for ETC Application | Yun-Sik Jin |
| 2001 | Design of a Material Ablation Test Stand | Guangyu Liu |
| 2001 | Development of an Induction Type Railgun | Akira Yamori |
| 2001 | Developments in Pulsed Power Technology | Ian R. Mcnab |
| 2001 | Effect of Electromagnetic Launch on Armature/Sabot Discard | Mehmet E. Erengil |
| 2001 | Effect of Mutual Inductance on the Pulsed Current Amplification of Magnetic Flux Compressors | Jun Li |
| 2001 | Effects of Conducting Shields on the Performance of Pulsed Rotating Machines | Kuo-Ta Hsieh |
| 2001 | Electric Railgun 3D Modeling: Computation of Eddy Currents and Lorentz Force | Afef Slama |
| 2001 | Electrodynamic Transition in Solid Armature Railguns | Francis Stefani |
| 2001 | Electromagnetic Aircraft Launch System Development Considerations | Richard R. Bushway |
| 2001 | Electromagnetic and Thermal Performance Validation of Finned Rails for EM Launch | Andrew P. Noel |
| 2001 | End-of-Life Design for Composite Rotors | J. H. Beno |
| 2001 | Energy Criteria for Combustion Control in a Large Caliber Gun | A. Voronov |
| 2001 | Erosion Observations on Recovered Large Caliber Armatures | Grant M. G. Hainsworth |
| 2001 | ETC research at Soreq NCR, Israel | R. Alimi |
| 2001 | Evaluation of a RVU-43 Switch as the Closing Switch for a Modular 300 kJ Pulse Power Supply for ETC Application | Hong -Sik Lee |
| 2001 | Examination of High Frequency Contact Chatter in Trailing Arm Armatures | Trevor Watt |
| 2001 | Experimental Analysis of Rotating arc Behaviors in a Rotary Arc Gap Switch for a 500 kJ Capacitor Bank | Chu-Hyun Cho |
| 2001 | Experimental Assessment of a 1 kJ Electro-Pyrotechnic Device Ignited in the 300-1000 V Range for ETC Studies | J. Caillard |
| 2001 | Experimental Study on a Novel Linear Electromagnetic Pumping Unit | Li Liyi |
| 2001 | First Experimental Results With the ISL 10 MJ DES Railgun PEGASUS | P. Lehmann |
| 2001 | Flywheel Motor/Generator Set as an Energy Source for Coil Launchers | A. Balikci |
| 2001 | Further Studies Concerning the Energy Distribution in the ETC Closed Chamber and the Impact on Observed Propellant Burn Rate | William F. Oberle |
| 2001 | Green Farm Electric Gun Research and Development Facility- The Final Chapter | Timothy R. Wolfe |
| 2001 | Gyroscopic Stabilization of Launch Package in Induction Type Coilgun | Giancarlo Becherini |
| 2001 | High Energy Density Capacitors for ETC Gun Applications | Holger G. Wisken |
| 2001 | High Voltage Stator for a Flywheel Energy Storage System | T. A. Aanstoos |
| 2001 | Influence of High Loading Density Charge Configurations on Performance of Electrothermal-Chemical (ETC) Guns | Gloria P. Wren |
| 2001 | Laminated Barrel Axial Stiffness Assessment | Andrew P. Noel |
| 2001 | Light Activated Semiconductors for ETC Pulsed Power Applications | Holger G. Wisken |
| 2001 | Long-Range Ballistics with EM guns | Harold Vanicek |
| 2001 | Magnetic Launch Assist-NASA's Vision for the Future | William A. Jacobs |
| 2001 | Measurement of the Properties of Plasma from ETC Capillary Plasma Generators | Michael J. Taylor |
| 2001 | Mechanics of Composite Rotating Machines for Pulsed Power Applications | Jerome T. Tzeng |
| 2001 | Modeling Enhanced Gas Generation Rates in a 155-mm ETC Gun | Clive R. Woodley |
| 2001 | Modeling Hybrid Electric HMMWV Power System Performance | Scott Fish |
| 2001 | Modeling of a Compulsator and Railgun System | Michael Giesselmann |
| 2001 | Multi-Turn Railguns: Concept Analysis and Experimental Results | Aleksey E. Poltanov |
| 2001 | Multishot Performance of an Insulator in a Laboratory Electromagnetic Launcher | Rachel Monfredo Gee |
| 2001 | New Monopulse Plasma Generation and Acceleration Facility for Surface Treatment | M. Rott |
| 2001 | Novel PFN with Current Turn-Off Capability for Electric Launchers | E. Spahn |
| 2001 | Numerical Modeling of the Velocity Skin Effects: an Investigation of Issues Affecting Accuracy | Kuo-T Hsieh |
| 2001 | Overview of ETC program in Korea | Jaewon Jung |
| 2001 | Overview of the Electric Launch Technology Program in China | Jun Li |
| 2001 | Parameters for an Electromagnetic Naval Railgun | Ian R. McNab |
| 2001 | Physics of Solid Armature Launch Transition into Arc Mode | E. M. Drobyshevski |
| 2001 | Plasma-Propellant Interactions Studies: Measurements of Heat Flux Produced by Hydrocarbon Ablation-Supported Plasmas | Anthony W. Williams |
| 2001 | Power Converters for Railguns | John A. Pappas |
| 2001 | Predicted Versus Actual Performance of the Model Scale Compulsator System | J. R. Kitzmiller |
| 2001 | Problems, Results and Prospects of Electric Launch in Russia | Philip G. Rutberg |
| 2001 | Protection Scheme of a Charging and Discharging System for a 500 kJ Capacitor Bank | Geun-Hie Rim |
| 2001 | Pulse Power Capability of High Energy Density Capacitors Based on a New Dielectric Material | Kirk M. Slenes |
| 2001 | Radiated Fields in Rail Launchers Operation | Andrea Tellini |
| 2001 | Radiation Absorption of Propellant Gas | Klaus Gruber |
| 2001 | Railgunnery: Where Have We Been? Where Are We Going? | Richard A. Marshall |
| 2001 | Recoil Considerations for Railguns | Eric L. Kathe |
| 2001 | Review of the Recent Works of Ukrainian Authors in the Field of Electromagnetic Acceleration and Related Topics | Volodymyr T. Chemerys |
| 2001 | Rotordynamics Design and Test Results for a Model Scale Compulsator Rotor | Brian T. Murphy |
| 2001 | Search for new Possibilities of Attaining High Launching Velocities | Gennady A. Shvetsov |
| 2001 | Simulation-Based Optimal Sizing of Hybrid Electric Vehicle Components for Specific Combat Missions | Scott Fish |
| 2001 | Single and Multiphase Compulsator System Architectures: a Practical Comparison | Jonathan R. Kitzmiller |
| 2001 | Single Shot and Burst Repetitive Operation of Thyristors for Electric Launch Applications | Thomas F. Podlesak |
| 2001 | Status and Results of the German R&D Program on ETC Technologies | Thomas H. G. G. Weise |
| 2001 | Strap-Down Microelectromechanical (MEMS) Sensors for High-G Munition Applications | T. Gordon Brown |
| 2001 | Studies of a Very High Efficiency Cryogenic Launcher | B. M. Novac |
| 2001 | Telemetry systems and electric gun projectiles | William P D'Amico |
| 2001 | The Evaluation of Advanced Composite Material Performance in High Speed Pulsed Power Rotor Applications | Geza Nagy |
| 2001 | The Impact of Gun Dimensions on the Operational Effectiveness of a Naval Surface Fleet Equipped with Long Range Electromagnetic Guns | Michael F. Stumborg |
| 2001 | The Multi-Stage Railgun | Antonio Musolino |
| 2001 | The Operational Value of Long Range Land Attack EM Guns to Future Naval Forces | Ivan T. Luke Jr. |
| 2001 | The Path of Overcoming the Velocity Skin-Effect in Rail Accelerators | B. A. Uryukov |
| 2001 | The Response of Different Copper Alloys as Rail Contacts at the Breech of an Electromagnetic Launcher | Rachel Monfredo Gee |
| 2001 | The Science and Technology of Electric launch | Harry D. Fair |
| 2001 | The Secondary Discharges and Their Influence on the Work of Rail Accelerator | A. D. Lebedev |
| 2001 | The Self-Excitation Process in Electrical Rotating Machines Operating in Pulsed Power Regime | M. D. Driga |
| 2001 | Thermal Control of Railgun Armatures | Ian R. McNab |
| 2001 | Thermal Management Techniques for an Advanced Linear Motor in an Electric Aircraft Recovery System | Ryan J. Elwell |
| 2001 | Thermal Stress in EML Rail-Conductor Overlays | Sikhanda Satapathy |
| 2001 | Triggered Switches for High Repetition Rate Commutation of Capacitive Stores | N. P. Bublik |
| 2001 | UK Electric Gun National Overview | David C. Haugh |
| 2001 | Use of Multi-Turn Railguns as High-Speed Limiters of Short-Circuit Current for Large Power Plants | Aleksey E. Poltanov |
| 2001 | "Smart Gun" for Artillery Muzzle Velocity Control: Simulations and Experimental Proof of Principle | Steve R. Fuller |
| 2003 | 3-D Modeling of Electromagnetic Fields in Application to Electromagnetic Launchers | Mikhail P. Galanin |
| 2003 | A 4.5-MJ Pulsed Power Supply for Railgun Experiments | Miguel Del Guercio |
| 2003 | A Description of the Wire Explosion Process for ETC Plasma Generators | Michael J. Taylor |
| 2003 | A High-Explosive Round for a Rectangular Railgun Bore Cross Section | Alexander E. Zielinski |
| 2003 | A Long-Range Naval Railgun | John McFarland |
| 2003 | A New In Situ Method for the Measurement of Ignition Delays and the Propagation of the Ignition Wave in Gun Charges | David Zoler |
| 2003 | A Novel Capillary Plasma Switch (CPS) for Electrothermal Launchers | Kefu Liu |
| 2003 | A Survey of Armature Transition Mechanisms | J. P. Barber |
| 2003 | Accelerating Conductors by Electromagnetic Action Through Metallic Shields | Bucur M. Novac |
| 2003 | An Application Guide for Compulsators | Jon R. Kitzmiller |
| 2003 | An Optimized Double Ramp Integrated Launch Package Design for Railguns | Jon R. Mitzmiller |
| 2003 | Analysis and Modeling of the Active Compulsator | Yongqian Xiong |
| 2003 | Analysis of a Capacitor-Based Pulsed-Power System for Driving Long-Range Electromagnetic Guns | Jack S. Bernardes |
| 2003 | Analysis of a Homopolar Disk Generator via Equivalent Network | Sami Barmada |
| 2003 | Analysis of Electromagnetic Systems Using the Extended Bond Graph Method: Mechanically Static Systems | Dwight Landen |
| 2003 | Analysis of Physical Effects on the Electrode Surfaces in Rail Launchers | Gennady A. Shvetsov |
| 2003 | Analysis of the Performance of a Combined Coil-Rail Launcher | Sami Barmada |
| 2003 | Analysis of the Performance of a Multistage Railgun | A. Musolino |
| 2003 | Analysis on High Surge Voltages Generated in Paralleled Capacitor Banks | Jin-Sung Kim |
| 2003 | Analytical Series Expressions for the Self- and Mutual Inductances of Two-Dimensional Coils in the Form of Partial Sectors | Venkataraman Thiagarajan |
| 2003 | Assessment of Losses in the Field Coil of the Compulsator Under Dynamic Conditions | Siddharth B. Pratap |
| 2003 | Assessment of the Blast Wave Generated by a Low-Energy Plasma Igniter and Spectroscopic Measurements | Jean Caillard |
| 2003 | Basic Investigations in a 70-mm Firing Smulator | Hans K. Haak |
| 2003 | Capacitive Pulsed Power Supply Systems for ETC Guns | H. G. Wisken |
| 2003 | Capillary Discharge in the Open Air | Seong-Ho Kim |
| 2003 | Chemical Effects in Plasma Ignition | Robert A. Fifer |
| 2003 | Circuits for Protecting and Triggering SCRs in High Power Converters | Angelo L. Gattozzi |
| 2003 | Comparison of Plasma Ignition Parameters and Firing Performance With 20- and 60-mm Electrothermal-Chemical Guns | A. Kay |
| 2003 | Computation of Inductances for Pulsed Power Generators Using a Semianalytic Method | Venkataraman Thiagarajan |
| 2003 | Consideration of the Energy Transfer Mechanisms Involved in SPECT Ignition Systems | Michael J. Taylor |
| 2003 | Coupled Finite-Element Codes for Armature Design | James F. Newill |
| 2003 | Critical Components for High Energy Density Capacitor Modules | H. G. Wisken |
| 2003 | Design and Testing of a High-Speed Spin Test for Evaluating Pulse Alternator Windage Loss Effects | Michael D. Werst |
| 2003 | Designing Magneto-Rheological Dampers in a Fire Out-of-Battery Recoil System | Mehdi Ahmadian |
| 2003 | Diagnostics and Hardware Techniques for Measuring In-Bore Pressures from Transitioning Metal Armatures | Timothy R. Wolfe |
| 2003 | Doppler-Radar: a Possibility to Monitor Projectile Dynamics in Railguns | M. Schneider |
| 2003 | Dynamic Response of Electromagnetic Railgun Due to Projectile Movement | Jerome T. Tzeng |
| 2003 | Effect of Converter Packaging Techniques on Device Electrical Conduction | Angelo L. Gattozzi |
| 2003 | Effect of Geometry Change on the Current Density Distribution in C-Shaped Armatures | Laura Rip |
| 2003 | Effects of Dielectric Material on Arc Plasma Pressure and Ablation Measurement in High-Power Apparatus | Pascal Andre |
| 2003 | Electric Launch Science and Technology in the United States | Harry D. Fair |
| 2003 | Electrodynamics of the Current Melt-Wave Erosion Boundary in a Conducting Half-Space | Robert Merrill |
| 2003 | Electrothermal Technology of Coating | E. Ya. Shcolnikov |
| 2003 | ETC Closed-Vessel Experiments with Alkali-Doped Propellants | Sten Andreasson |
| 2003 | Experimental Results of a Two-Stage Plasma Armature Railgun | Akira Yamori |
| 2003 | Experiments to Assess Structural Loads During Solid Armature Contact Transition | Alexander E. Zielinski |
| 2003 | Experiments to Define Plasma-Propellant Interactions | Richard A. Beyer |
| 2003 | Experiments to Measure Melt-Wave Erosion in Railgun Armatures | Francis Stefani |
| 2003 | Fast, Real-Time Monitoring of Rotating Machines Using Digital Motion Control Coprocessors | M. Giesselmann |
| 2003 | Field Analysis in Tubular Coilguns by Wavelet Transform | Sami Barmada |
| 2003 | Finite-Element Analyses of Problems in Electromagnetic Launch Using a PC-Based Beowulf Cluster With High-Speed Networks | Venkataraman Thiagarajan |
| 2003 | First Design Study of an Electrical Catapult for Unmanned Air Vehicles in the Several Hundred Kilogram Range | Bernhard Reck |
| 2003 | Helicoidal Electromagnetic Field for Coilgun Armature Stabilization | Giancarlo Becherini |
| 2003 | High-Current Vacuum Triggered Switching Devices | D. F. Alferov |
| 2003 | High-Power Mosfets and Fast-Switching Thyristors Utilized as Opening Switches for Inductive Storage Systems | Sigo Scharnholz |
| 2003 | High-Speed Compulsator Stator Thermal Management | Hsing P. Liu |
| 2003 | Integral Containment Electromagnetic Gun | Eric L. Kathe |
| 2003 | Integrated Launch Package Design with Considerations for Reduced-Scale Demonstration | Alexander E. Zielinski |
| 2003 | Launch to Space with an Electromagnetic Railgun | Ian R. McNab |
| 2003 | Lightweight Containment for High-Energy Rotating Machines | Josepg L. Strubhar |
| 2003 | Load Resistance Estimation in ETC Experiments | Young-Hyun Lee |
| 2003 | Magnetic Blow-Off in Armature Transition | John P. Barber |
| 2003 | Minimization of the Input Power for a Long Railgun | Ian R. McNab |
| 2003 | National Overview of the German ETC Program | Th. H. G. G. Weise |
| 2003 | Numerical Modeling of Melt-Wave Erosion in Conductors | Tom Benton |
| 2003 | Obtainable Microstructures in Electrical Conductors Made of a Copper-Silver Alloy | Zachira Castro-Dettmer |
| 2003 | Ohmic Heating in a Double-Taper Sabot-Armature | John D. Powell |
| 2003 | Overview of ETC Research in Korea | Jae-Won Jung |
| 2003 | Overview of the Electric Launch Activities at the French-German Research Institute of Saint-Louis (ISL) | Pascale Lehmann |
| 2003 | Parallelization of EMAP3D Based on Element-by-Element Jacobi Preconditioned Conjugate Gradient Method | Kuo-Ta Hsieh |
| 2003 | Parametric Study of an Augmented Railgun | J. Gallant |
| 2003 | Performance of 2.4-MJ Pulsed Power System for Electrothermal-Chemical Gun Application | Yun-Sik Jin |
| 2003 | Performance of Gas-Puffing Inverse Pinch Switch for Pulsed Power System | Kook-Hee Cho |
| 2003 | Plasma-Propellant Interaction at Low Plasma Energies in ETC Guns | Chay Goldenberg |
| 2003 | Prediction and Verification of Electromagnetic Forces in Helical Coil Launchers | Thomas G. Engel |
| 2003 | Preliminary Investigation of Microwave Telemetry on an EML Projectile | S. Levinson |
| 2003 | Progress on Developing the "Magnetic Obturator," a Novel Railgun Armature | Francis Stefani |
| 2003 | Pulsed-Duty Characterization of Turn-Off for a Population of SCRs and the Effect of Variation on Equalization Circuit Design | John A. Pappas |
| 2003 | Reduction in Fluctuation of the Accelerating Force in Linear Induction Launchers | A. Balikci |
| 2003 | Repetitive Inductive Storage Supply for an ETC Tank Gun | A. Pokryvailo |
| 2003 | Research on Electrode-End Contact Degradation of Metallized Polypropylene Capacitors | Fuchang Lin |
| 2003 | Research on the Relation Between the Propulsive Force and Magnetic System of the Coil Launcher Based on the Mechanism of Hybrid Switched Reluctance Motor | Ping Zheng |
| 2003 | Results from a Full-Scale "Smart Gun" Trial | S. R. Fuller |
| 2003 | Results of Recent Research on Electromagnetic Launch Technology in Russia | Ph. G. Rutberg |
| 2003 | Sensor Development for Compulsator Driven Railgun Systems | Charles E. Penney |
| 2003 | Study of Two-Phase Passive Compulsator | Langru Li |
| 2003 | Study on the Coil Design of The Reusable Linear Magnetic Flux Compressor | Zanji Wang |
| 2003 | Surface Characterization of Energetic Materials Using Point-to-Point Contact FTIR-ATR | Joyce Newberry |
| 2003 | System Simulations and Experiments for Electrothermal-Chemical Guns Powered by Compulsators | Yuan Pan |
| 2003 | Thermal Stresses in an Actively Cooled Two-Piece Rail Structure | Sikhanda Satapathy |
| 2003 | Thermophysical Evaluation of a Novel Aluminum Alloy with Application to an Integrated Launch Package | Alexander E. Zielinski |
| 2003 | Transition in Brush Armatures | M. Schneider |
| 2003 | U.K. electric gun national overview | David C. Haugh |
| 2003 | Ultimate Kinematic Characteristics of Composite Solids | Gennady A. Shvetsov |
| 2003 | Ultimate Properties of the Polypropylene Film for Energy Storage Capacitors | Pierre Michalczyk |
| 2003 | Use of Saber Circuit Simulation Software for the Modeling of Compensated Pulsed Alternators Driving a Railgun Load | Mark Crawford |
| 2003 | Viscoelastic Analysis of Composite Rotor for Pulsed Power Applications | Jerome T. Tzeng |
| 2003 | Vulnerability Studies of High-Speed Compulsators | Geza Nagy |
| 2003 | Why Solid Armatures Fail and How They can be Improved | Trevor E. James |
| 2003 | Why "C" Armatures Work (and Why They don't!) | David C. Haugh |
| 2003 | Widely Developing Electric Launch Technology in China | Ying Wang |
| 2005 | A Controller of Brushless DC Motor for Electric Vehicle | Wu Hong-xing |
| 2005 | A High Current, High dI/dt, Light Activated Thyristor | D. M. Giorgi |
| 2005 | A novel driving and control system for direct-wheel-driven electric vehicle | Tao Guilin |
| 2005 | A Novel Type Rail-Coil Hybrid Electromagnetic Launcher | Yang Shiyong |
| 2005 | A Pulsed MHD Generator for Electric Launcher | Wang Ping |
| 2005 | A Turbulent Melt-Lubrication Model of Surface Wear in Railgun Armatures | Robert Merrill |
| 2005 | An Improved, Linear Homopolar, Electro-Magnetic Launcher: STAR | W. C. Nunnally |
| 2005 | Analysis of Rail Surfaces From a Multi-Shot Railgun | R. A. Meger |
| 2005 | Analysis of the Effects of Induced Fields from Sliding Electrical Contacts | Venkataraman Thiagarajan |
| 2005 | Armatures Sliding Contact Performance of Multiple Brush | M. Schneider |
| 2005 | Axial Excited Hybrid Reluctant Motor Applied in EV and Research of its Axial Coil Signal | Zhang Qianfan |
| 2005 | Combined Electro-Discharge Launcher Working on Hydrogen | Alexander V. Budin |
| 2005 | Communication on Vehicle Management Unit in the Electric Vehicle | Wu Hong-xing |
| 2005 | Compact Capacitor Technology for Future Electromagnetic Launch Applications | Kirk |
| 2005 | Comparative Study of Railgun Housings Made of Modern Fiber-Wound Materials, Ceramic or Insulated Steel Plates | P. Lehmann |
| 2005 | Comparison from Modelling and Experiment of Electrothermal Plasma Temperature and Pressure within Granular Propellant Beds | Michael J. Taylor |
| 2005 | Computation of Magnetic Fields using a 2D Hybrid Finite Element/Boundary Element Algorithm and Comparison with Analytical Solutions | Venkataraman Thiagarajan |
| 2005 | Control of Variation of Delay Time from Ignition to Launch in ETC Gun | Yasuhiro Akahoshi |
| 2005 | Crack Tip Behavior Under Pulsed Electromagnetic Loading | Sikhanda Satapathy |
| 2005 | DC Constant Current Power Supply used to Power a Multi-Layer Launching System | Meiwu Li |
| 2005 | Design Characteristics of the Induction Motor Used for Hybrid Electric Vehicle | Wang Tiecheng |
| 2005 | Design of an 8-MJ Integrated Launch Package | S. S. Satapathy |
| 2005 | Determining Pulsed Alternator Thyristor Converter Firing Angles to Produce a Desired Launcher Current | John A. Mallick |
| 2005 | Development of a Naval Railgun | I. R. McNab |
| 2005 | Development of a Plasma Armature Railgun with Two Distributed Power Supplies | Akira Yamori |
| 2005 | Development of the 40 V Hybrid Super-Capacitor Unit | Zou Li-yan |
| 2005 | Effect of Liquid Film (Indium) on Thermal and Electromagnetic Distribution of an Electromagnetic Launcher with New Armature | M. Ghassemi |
| 2005 | Effect of Rail Dimension on Current Distribution and Inductance Gradient | Asghar Keshtkar |
| 2005 | Electric Discharge Parameters In High Density Gas | Alexander F. Savvateev |
| 2005 | Electrical Characteristics of High Energy Density MLC for Pulse Power Application | Ling Dai |
| 2005 | Electromagnetic and Mechanical Gyro Stabilization in Railgun Launcher | Giancarlo Becherini |
| 2005 | Electromagnetic Launch Science and Technology in the United States Enters a New Era | Harry D. Fair |
| 2005 | Electromagnetic Launchers - the New Concept | Aleksandr V. Kozlov |
| 2005 | Empirical Data on High Flow Velocity Coolants in Copper Tubing and the Effects on the Coolant's Electrical Resistivity | J. J. Hahne |
| 2005 | Estimating the Efficiency of Pulsed Alternators | D. Landen |
| 2005 | ETC Plasma Ignition for Modular Artillery Charges | Th. H. G. G. Weise |
| 2005 | ETC research at Soreq NRC, Israel | S. Wald |
| 2005 | Evaluation of an ETC Concept Where Propellant Combustion is Stimulated by Conducting Electric Current Through the Flame | Sten Anderson |
| 2005 | Experimental and Computational Investigation of Root-Radius Melting in C-Shaped Solid Armatures | Trevor Watt |
| 2005 | Experimental Investigation of Hypervelocity Plasma Jets Generated with a Coaxial Arc Device | Martin Rott |
| 2005 | Experiments With Brush Armatures: New Technical Solutions | M. Schneider |
| 2005 | Experiments with Brush Projectiles in a Parallel Augmented Railgun | Johan Gallant |
| 2005 | Fast, Transient Energy Extraction from High Frequency AC-Alternators for use in Electromagnetic Launch Applications. | M. Giesselmann |
| 2005 | FEM/MOM Formulation for the Analysis of Current Distribution in Rail Launchers | Antonino Musolino |
| 2005 | Finite Difference Study of Unconventional Structures of PM Linear Machines for Electromagnetic Aircraft Launch System | Javier Rios Quesada |
| 2005 | Flywheel Charging Module for Energy Storage Used in Electromagnetic Aircraft Launch System | Dwight W. Swett |
| 2005 | Generators Compact, Lightweight, Superconducting Power | Paul N. Barnes |
| 2005 | Geometric Modeling and EM Analysis of Electrical Windings for Pulsed Alternators | G. A. Wedeking |
| 2005 | High energy density capacitors for eml applications | F. W. MacDougall |
| 2005 | High Energy Density Capacitors | Th. H. G. G. Weise |
| 2005 | Implementation of a 50kW 4-phase Switched Reluctance Motor Drive System for HEV | Wang Shuanghong |
| 2005 | Improved Performance of Linear Induction Launchers | A. Balikci |
| 2005 | Individual and Parallel Behavior of High Current Density, High-Voltage 4h-Silicon Carbide PiN Diodes | D. Surls |
| 2005 | Influence of bore and rail geometry on an electromagnetic naval railgun system - Electromagnetic Launch Technology, 2004. 2004 12th Symposium on | R. L. Ellis |
| 2005 | Insights from Numerical Modeling of Electric Armor using Hydrocode and Electromagnetic Software | Iian Robertson |
| 2005 | Integrating Electromagnetic Launchers on Ships | Antonios Challita |
| 2005 | Interruption of the Explosion of Plasma Initiator Wires | Michael J. Taylor |
| 2005 | Investigation of a 3D Hybrid Finite Element/Boundary Element Method for Electromagnetic Launch Applications and Validation using Semi-Analytical Solutions | Venkataraman Thiagarajan |
| 2005 | Investigation of Windage Splits in an Enclosed Test Fixture Having a High Speed Composite Rotor in Low Air Pressure Environments | H-P. Liu |
| 2005 | Iterative Transient Model for Railgun Electro-Mechanical Performance Optimization | Robert K. Pitman |
| 2005 | Li Ion Energy Storage for Pulse Power Applications | Tom Matty |
| 2005 | Loss Reduction Strategies in Design of Magnetic Bearing Actuators for Vehicle Applications | M. A. Pichot |
| 2005 | Magnetization Analysis of the Brushless DC Motor Used for Hybrid Electric Vehicle | Zheng Ping |
| 2005 | Mathematical model of the 5-DOF Sled Dynamics of an Electrodynamic Maglev System With a Passive Sled | Jeroen de Boeij |
| 2005 | Mechanical Behavior of the PEGASUS Railgun Projectile During the Launch | Bernard Reck |
| 2005 | Mechanisms Leading to the Enhancement of Gas Generation Rates in ETC Guns | Michael J. Taylor |
| 2005 | Mixing Processes of Plasmas in Electrothermal-Chemical Guns | C. R. Woodley |
| 2005 | Modelling the Electromechanical Interactions in a Null-Flux EDS Maglev System | Jeroen de Boeij |
| 2005 | Nine-Phase Armature Windings Design, Test and Harmonic Analysis | H. E. Jordan |
| 2005 | Numerical Modeling of Welt-Wave Erosion in 2D Block Armatures | F. Stefani |
| 2005 | Numerical Simulation of a Complete Generator-Rail Launch System | Sami Barmada |
| 2005 | Numerical Study of Long Rods Penetration Depth in Semi-Infinite Targets in Electromagnetic Launchers | Kamran Daneshjou |
| 2005 | Numerical Study on Groove Formation of Rails for Various Materials | Kuo-Ta Hsieh |
| 2005 | On the Noise Component in Muzzle Voltage Traces | David Melton |
| 2005 | Operating Control of Efficiently Generating of Induction Motor for Driving Hybrid Electric Vehicle (HEV) | Kou Bao-Quan Li Li-Yi |
| 2005 | Operational Requirements and Issues for Coilgun EM launchers | Ronald J. Kaye |
| 2005 | Overview of Directed Energy Weapon Developments | TH. H. G. G. Weise |
| 2005 | Overview of EML Research in Russia | G. A. Shvetsov |
| 2005 | Performance Analysis of Double-Stator Starter Generator for the Hybrid Electric Vehicle | Chai Feng |
| 2005 | Performance of a Copper-Silver Alloy as an EML Conductor Material | Zachira Castro-Dettmer |
| 2005 | Performance Spectrum of Optical Triggered Thyristor Switches for Electric Weapon Systems | Th. H G. G. Weise |
| 2005 | Preliminary Design of a 200 MJ Pulsed Power System for a Naval Railgun Proof of Concept Facility | Timothy Wolfe |
| 2005 | Rail Stator Augmentation Magnetic Flux Compression Linear Generator used in Electric Guns | Duan Xiaojun |
| 2005 | Reliable, Highly Reproducible Plasma Injectors for ET and ETC Launchers | Noam Shafir |
| 2005 | Research for Development of Industrial Coating Equipment Based on an Electrothermal Launcher | E. Ya. Shcolnikov |
| 2005 | Research of Novel Electromagnetic Catapults With Many Kinds of Uses | Li Liyi |
| 2005 | Research on the Passive EM Armor | Zheng Ping |
| 2005 | Research Progress in the Development of a High-Efficiency, Medium-Caliber Helical Coil Electromagnetic Launcher | T. G. Engel |
| 2005 | Resistance Calculation of the Reusable Linear Magnetic Flux Compressor Coil | Jun Li |
| 2005 | Rotordynamic Modeling Using Bond Graphs: Modeling the Jeffcott Rotor | Joaquin Campos |
| 2005 | Scanning Electron Microscope Examination of JA2 Propellant Samples Exposed to Plasma Radiation | Michael A. Schroeder |
| 2005 | Simulation and Research of One-Dimensional Coupling Model of SPETCG | Jiangsheng Sun |
| 2005 | Splits of Windage Losses in Integrated Transient Rotor and Stator Thermal Analysis of a High-Speed Alternator During Multiple Discharges | H-P. Liu |
| 2005 | Structural Mechanics for Electromagnetic Rail Guns | Jerome T. Tzeng |
| 2005 | Study of a Single-Stage Electromagnetic Launcher System Using Pancake Coil | Qibin Deng |
| 2005 | The Conception of the Explosion Cumulative Effect Electromagnetic Control Optimal Realization | Sergey V. Demidkov |
| 2005 | The Effect of Current and Speed on Perimeter Erosion in Recovered Armatures | Trevor Watt |
| 2005 | The Finite Element Analysis for the Magnetic of the Active EM Armor Projectile Interceptor | Li Zhiuyuan |
| 2005 | The Mechanical Behavior of Conductors Exposed to Short-Duration Thermal Loading | R. Watkins |
| 2005 | The Personal Railgun - a Small Study in System Integration | John P. Barber |
| 2005 | The Response of Propellants to Plasma Radiation | Richard A. Beyer |
| 2005 | Thermal Characteristics of a Laboratory EM Launcher | Harold Vanicek |
| 2005 | Thermal Management and Resistive Rail Heating of a Large-Scale Naval Electromagnetic Launcher | A. N. Smith |
| 2005 | UK Electric Gun National Overview | Mike Hinton |
| 2005 | Ultra-Stiff, Low Mass, EM Gun Design | M. D. Werst |
| 2005 | Use of a Fast Shock Tube as an Injector for Electromagnetic Railgun | Tian Yangmeng |
| 2007 | A Bench Top Railgun With Distributed Energy Sources | J. Mankowski |
| 2007 | A Magnetofluid Mechanical Model to Describe Rail-Armature Interface Phenomena | Venkataraman Thiagarajan |
| 2007 | A Model for Computing Equation of State of Plasma of the FST Injector of Electromagnetic Railgun | Tian Yangmeng |
| 2007 | A Plasma Railgun Experiment Addressing Launch-to-Space Issues | F. Stefani |
| 2007 | A Research Program to Study Airborne Launch to Space | I. R. McNab |
| 2007 | A Study of Magnetic Sawing in an Aluminum Bar | David Melton |
| 2007 | Ablation Study in a Capillary Sustained Discharge | Michael Keidar |
| 2007 | Acceleration of a Suborbital Payload Using an Electromagnetic Railgun | P. Lehmann |
| 2007 | Advanced Rail-Sabot Configurations for Brush Armatures | M. Schneider |
| 2007 | Aerothermodynamic Aspects of Railgun-Assited Launches of Projectiles With Sub- and Low-Earth-Orbit Payloads | Ognjan Bozic |
| 2007 | An Algorithm to Couple an External RL Circuit With the Finite-Element Code EMAP3D | Venkataraman Thiagarajan |
| 2007 | Analysis of Force Distribution Acting Upon the Rails and the Armature and Prediction of Velocity With Time in an Electromagnetic Launcher With New Method | M. Ghassemi |
| 2007 | Coefficient of Friction Measurement in the Presence of High Current Density | L. Brown |
| 2007 | Coordination of Large Pulsed Loads on Future Electric Ships | Lori N. Domaschk |
| 2007 | Cracking and Dominant Stresses in the Throat Region of C-Shaped Solid Armatures | T. J. Watt |
| 2007 | Design of Plasma Launcher With Gyro Stabilized Launch Mass | Giancarlo Becherini |
| 2007 | Design, Construction, and Testing of an Inductive Pulsed-Power Supply for a Small Railgun | A. Sitzman |
| 2007 | Development and Evaluation of a TSLGG-Application of an ETC Gun System to its First Stage | Y. Akahoshi |
| 2007 | Development of PMSW Drives for Hybrid Electric Car Applications | Ying Dai |
| 2007 | Down-Slope Contact Transition in Railguns | Sikhanda Satapathy |
| 2007 | Dynamic Response and Armature Critical Velocity Studies in an Electromagnetic Railgun | Kamran Daneshjoo |
| 2007 | Dynamic Response of Cantilevered Rail Guns Attributed to Projectile/Gun Interaction --Theory | Jerome T. Zheng |
| 2007 | Eddy Current Effects in the Laminated Containment Structure of Railguns | Dwight Landen |
| 2007 | Effect of Geometry Change on Armature Behavior | Sikhanda Satapathy |
| 2007 | Elastic Waves in Electromagnetic Launchers | Anthony J. Johnson |
| 2007 | Electric Armor Against Shaped Charges: Analysis of Jet Distortion With Respect to Jet Dynamics and Current Flow | Matthias Wickert |
| 2007 | Electrothermal Chemical (ETC) Armament System Integration Into a Combat Vehicle | Brad Goodell |
| 2007 | Evaluation of Advanced Si and SiC Switching Components for Army Pulsed Power Applications | Heather O'Brien |
| 2007 | Experimental Ballistic Improvement in a Pure Electrothermal (ET) 25-mm Gun | Roger Alimi |
| 2007 | Experimental Results from a Physical Scale Model Alternator as a Pulsed Power | Y. Yvonne Chen |
| 2007 | Experiments With Armature Contact Claddings | Francis Stefani |
| 2007 | Field Coil Insulation Testing for Pulse Power Alternators | Clay S. Hearn |
| 2007 | Field Initiation Design Fundamentals for Pulsed Alternators | Jon R. Kitzmiller |
| 2007 | High Energy density (HED) Biaxially-Oriented Poly-Propylene (BOPP) Capacitors For Pulse Power Applications | E. J. Barshaw |
| 2007 | Highly Local Measurements of Strong Transient Magnetic Fields During Railgun Experiments Using CMR-Based Sensors | M. Schneider |
| 2007 | In-Flight Armature Diagnostics | S. W. Allison |
| 2007 | Induction Motor Performance Testing With an Inverter Power Supply: Part 1 | Howard E. Jordan |
| 2007 | Induction Motor Performance Testing With an Inverter Power Supply: Part 2 | Raymond C. Zowarka |
| 2007 | Integration and Test of a Second Dual Purpose Pulse Forming Network Int the P&E HWIL SIL | E. J. Barshaw |
| 2007 | Interface Breakdown During High-Power Microwave Transmission | A. A. Neuber |
| 2007 | Investigation of Damage to Solid-Armature Railguns at Startup | Trevor Watt |
| 2007 | Magnetic Repulsive Forces on Armature Contacts | Robert Merrill |
| 2007 | Measurement of High-Strain-Rate Adiabatic Strength of Conductors | Dwight Landen |
| 2007 | Microstructures in the Throat Region of Recovered Aluminum-Alloy Armatures | T. J. Watt |
| 2007 | Modeling Assumptions for Railguns | T. J. Watt |
| 2007 | Modeling of the Plasma-Propellant Interaction | Andrew J. Powitzky |
| 2007 | Monolithic Backbone Railgun | Eric L. Kathe |
| 2007 | Multiprojectile Active Electromagnetic Armor | Li Xiaopeng |
| 2007 | Naval Railguns | I. R. McNab |
| 2007 | New Carbon-Copper Composite Material Applied in Rail-Type Launching System | Qin Hong |
| 2007 | Numerical Simulation of Current Density Distributions in Graded Laminated Armatures | Yuanqing Liu |
| 2007 | On the Design of Coilguns for Super-Velocity Launchers | A. Balikci |
| 2007 | Overview of Some Recent EML Research in Russia | Gennady A. Shvetsov |
| 2007 | Phenomenological Electromagnetic Modeling of Laminated-Containment Launchers | John Mallick |
| 2007 | Physical Scale Model Alernators as a Pulsed-Power Source Simulator | Nathan Shepard |
| 2007 | Plasma Ignition in a 30-mm Cannon | Richard A. Beyer |
| 2007 | Plasma-Replacement Technology of ETC-Ignition of Powder Charges in High-Velocity Launchers | S. V. Sinyaev |
| 2007 | Progress in Electromagnetic Launch Science and Technology | Harry D. Fair |
| 2007 | Projectile Nosetip Thermal Management for Railgun Launch to Space | I. R. McNab |
| 2007 | Projectiles With Rod-Shaped Payloads for the PEGASUS Railgun | Bernhard Reck |
| 2007 | Pulsed Current Static Electrical Contact Experiment | Harry N. Jones |
| 2007 | Pulsed-Power Driven Metafex Launchers | David Davidson |
| 2007 | Railgun Tribology--Chemical Reactions Between Contacts | Chadee Persad |
| 2007 | Recent Activities in Electrothermal Chemical Launcher Technologies at BAE Systems | Jahn Dyvik |
| 2007 | Research on a Tubular Longitudinal Flux PM Linear generator Used for Free-Piston Energy Converter | Ping Zheng |
| 2007 | Research on the High Power Density Electromagnetic Propeller | Ranran Liu |
| 2007 | Research on the Parameters and Performances of a 4QT Prototype Machine Used for HEV | Ping Zheng |
| 2007 | Results of Copper-Silver Rail Materials Tests | Zachira Castro |
| 2007 | Simulation of Liquid Lubricant Injection in Electromagnetic Launcher Armatures | Richard F. Salant |
| 2007 | Strain Evolution in Metal Conductors Subjected to Short-Duration Current Pulses | F. Gallo |
| 2007 | Structural Properties and Testing of a Composite Banding Used in High-Speed Rotors | Vasileios Lelos |
| 2007 | Study of a Three-Stage Reconnection Electromagnetic Launcher Using Triggered Vacuum Switches | Zhao Chun |
| 2007 | Study of Plasma Jet Capabilities to Produce Uniform Ignition of Propellants, Ballistic Gain, Significant Decrease of the "Temperature Gradient" | D. Zoler |
| 2007 | Study on Improving the Performance of Permanent Magnet Wheel Motor for the Electric Vehicle Application | Shihua Wu |
| 2007 | Super-Capacitor Stacks Management System With Dynamic Equalization Techniques | Rengui Lu |
| 2007 | System-Level Thermal Management of Pulsed Loads on an All-Electric Ship | Tyler W. Webb |
| 2007 | Temperature Compensation and Improved Ballistic Performance in a Solid Propellant Electrothermal-Chemical (SPETC) 40-mm Gun | Roger Alimi |
| 2007 | The Study of the Operational Modes and Control Strategies of an Advanced Electromechanical Converter for Automobiles | Yuan Cheng |
| 2007 | Thermoplastic Applications for Pulse Power Alternators | Clay S. Hearn |
visitors since June 10th, 2005.
